Panasonic AG-AC130P Benutzerhandbuch
45
Shooting
Uploading metadata [META DATA]
You can perform the following operations.
If necessary make preparations.
If necessary make preparations.
•
Loading metadata
Insert the memory card on which the metadata
is recorded into the camera. (For details on clip
metadata, see page 44.)
Insert the memory card on which the metadata
is recorded into the camera. (For details on clip
metadata, see page 44.)
•
Selecting whether to record the metadata on the
memory card
memory card
•
Initializing the metadata inside the camera
•
Displaying the metadata inside the camera
1
Turn the POWER/MODE switch to go into
<CAMERA> mode.
2
Press the <MENU> button.
Menu operation (Page 28 of Vol.1)
3
Tilt the OPERATION lever in the < >< >
directions to select [META DATA], and push the
OPERATION lever (or tilt in the < > direction).
4
Tilt the OPERATION lever in the < >< >
directions to select items, and push the
OPERATION lever.
[CARD READ]:
Loads the metadata set on the memory card on
to the camera.
Move to [CARD READ], push the OPERATION
lever, select either [SLOT1]/[SLOT2]/[NO], and
push the OPERATION lever.
to the camera.
Move to [CARD READ], push the OPERATION
lever, select either [SLOT1]/[SLOT2]/[NO], and
push the OPERATION lever.
•
Up to eight items of metadata on the memory
card can be displayed, starting from the most
recent creation date.
card can be displayed, starting from the most
recent creation date.
•
If characters other than single-byte
alphanumeric characters are used in the
metadata file to be loaded they are displayed
as “*”.
alphanumeric characters are used in the
metadata file to be loaded they are displayed
as “*”.
[RECORD]:
Sets whether to record the metadata loaded on
the camera simultaneously on a memory card
when recording.
Select either [ON]/[OFF] (format/do not format),
and push the OPERATION lever.
The factory setting for this mode is [OFF].
the camera simultaneously on a memory card
when recording.
Select either [ON]/[OFF] (format/do not format),
and push the OPERATION lever.
The factory setting for this mode is [OFF].
[USER CLIP NAME]:
The [USER CLIP NAME] recording method is
selectable. For details, see the next column.
selectable. For details, see the next column.
[META DATA PROP]:
Displays the metadata recorded in the camera.
[CLIP COUNTER RST]:
Resets the counter value to 1.
Select either [YES]/[NO] (reset/do not reset),
and push the OPERATION lever.
Select either [YES]/[NO] (reset/do not reset),
and push the OPERATION lever.
[META INIT SET]:
Initializes the metadata recorded in the camera.
Select either [YES]/[NO] (initialize/do not
initialize), and push the OPERATION lever.
Select either [YES]/[NO] (initialize/do not
initialize), and push the OPERATION lever.
5
Press the <MENU> button to release menu
mode.
Selecting the [USER CLIP NAME]
recording method
Press the <MENU> button and select [META
DATA][USER CLIP NAME] to select the [USER
CLIP NAME] recording method. Two options are
available: [TYPE1] and [TYPE2].
DATA][USER CLIP NAME] to select the [USER
CLIP NAME] recording method. Two options are
available: [TYPE1] and [TYPE2].
[USER CLIP NAME] to be recorded
[TYPE1]
[TYPE2]
When clip metadata
has been loaded
Uploaded data
Uploaded data
+
COUNT
value*
When no clip
metadata has been
loaded, or when
recording of loaded
clip metadata has
been disabled
Sequential
5-digit number
in the order of
shooting
Sequential
5-digit number
in order of
shooting