Panasonic SV-AV10EN Benutzerhandbuch

Seite von 39
31
Indications
1) Remaining Battery Power [
]
When the battery power becomes low, the indication
changes. When the battery level indicator indicates
[
], the battery will run out in a few minutes.
Recharge the battery. 
 may be displayed when
the AC Adaptor is used. This is not abnormal.
2) Status Indications
Playback Mode
≥:1:
Playback (
15,19,20,26)
≥:;:
Still Playback (
15,19,20,26)
≥5/6: Cue Playback/Review Playback (Only for 
sound play back) (
19,20)
(10 times speed with 10 
6 / 5 and 60 times 
speed with 60 
6 / 5)
:
Repeat Playback (
20)
≥SLIDE1: Slide play back
Recording Mode
:
Flash (
16)
≥1/100,1/120 Horizontal Stripes Reduction Mode 
(
12)
≥:
ª
Backlight Compensation Mode (
22)
≥:
1
White Balance setting Mode (
22)
3) Card Indication 1
MPEG4
: During recording, this indication is lit in 
red, and the [ACCESS] Lamp lights. 
When it is lit in green, recording is not 
possible.  When Remaining Time 
Indication is [R:0h00m], it flashes in red.
When no card is inserted, the 
 
indication flashes in red.
R:0h00m:
Remaining Time Indication
F/N/E1/E2: Shows the picture quality. [F]: Fine, [N]: 
Normal, [E1]: Economy and [E2]: 
Economy 2.
PICTURE
: During recording, this indication is lit in 
red, and the [ACCESS] Lamp lights. 
When it is lit in green, recording is not 
possible.  When Remaining Time 
Indication is [R:0h00m], it flashes in red.
When no card is inserted, the 
 
indication flashes in red.
0000:
Number of remaining recordable pictures
F/N/E:
Select a picture quality.  [F]: Fine, [N]: 
Normal and [E]: Economy
VOICE
: During recording, this indication is lit in 
red, and the [ACCESS] Lamp lights. 
When it is lit in green, recording is not 
possible.  When Remaining Time 
Indication is [R:0h00m], it flashes in red.
When no card is inserted, the 
 
indication flashes in red.
R:0h00m:
Remaining Time Indication
4) Card Indication 2
:
DPOF setting (setting for more than 1 
print) (
25)
≥[00]:
Number set DPOF (
25)
≥ [ 
] : LOCK setting (
24)
≥ [640] :
Picture size
When you play back a scene recorded on the SD 
Multi AV Device with a picture size specification 
different from the one stated above, the following 
indications should be displayed. If the size of the 
picture is from 640 pixels to 800 pixels, the [
[640]] 
indication will be displayed;
if picture size is 640 pixels or lower, the scene 
should be displayed without any indication of picture 
size.
≥[SVGA]: From 800 to 1024
≥[XGA]:
From 1024 to 1280
≥[SXGA]: From 1280 to 1600
≥[UXGA]: Above 1600 pixels
5) Date/Time Indication (
10)
6) Volume (
21)
≥Use this indication to adjust the volume of playback 
sound from the earphone.
7) File Name Display (
15, 17, 19, 20)
MPEG4
R
0h10m
APR  10  2002
0h10m14s
ß
PLEASE  WAIT
1
2
3
5
8
N
PICTURE
100-0001
1
VOLUME
 
 + 
6
6
7
2
4