Panasonic NV-GS37EB Benutzerhandbuch

Others

LSQT1006

If any one of the following indications lights up or 
flashes, please check the movie camera.
Confirmatory indications
Y: A cassette with the accidental erasure 

prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.

[--]/

0:

The built-in battery is low. 

°: The warning/alarm indication appears when 

you record yourself. Turn the LCD monitor 
towards the viewfinder and check the 
warning/alarm indication.

REMOTE : 

An incorrect remote control mode has been 
selected. 

2END: 

The tape came to the end during recording.

::  The video heads are dirty. 

Textual indications
3DEW DETECT/3EJECT TAPE:

Condensation has occurred. Take out the 
cassette and wait for a while. It takes some 
time until the cassette holder opens, but this 
is not a malfunction. 

LOW BATTERY: 

The battery is low. Recharge it. 

NO TAPE : 

No tape is inserted. 

TAPE END: 

The tape came to the end during recording.

CHECK REC TAB: 

You are attempting to record pictures on a 
tape with the accidental erasure prevention 
slider placed in the [SAVE] position. 
You are attempting audio dubbing or digital 
dubbing on a tape with the accidental 
erasure prevention slider placed in the 
[SAVE] position. 

CHECK REMOTE MODE:

An incorrect remote control mode has been 
selected. This is only displayed at the first 
operation of the remote control after 
powering-on. 

WRONG TAPE FORMAT: 

You are attempting to play back a tape 
section that has been recorded with a 
different TV system. This cassette is 
incompatible.

CLOSE CASSETTE DOOR:

The cassette cover is open. Close the 
cassette cover. 

UNABLE TO A.DUB (LP RECORDED): 

Audio dubbing cannot be performed 
because the original recording was in LP 
mode.

UNABLE TO A.DUB:

You are attempting to perform audio 
dubbing on a non-recorded tape.

COPY PROTECTED: 

Images cannot be recorded correctly 
because the medium is protected by a copy 
guard.

NEED HEAD CLEANING: 

The video heads are dirty. 

PUSH THE RESET SWITCH: 

An irregularity in the equipment has been 
detected. Press the [RESET] button (

). 

This may solve the problem.

DISCONNECT USB CABLE: 

You are attempting to record pictures on a 
tape with the USB cable connected to the 
movie camera.

PC DOES NOT SUPPORT USB2.0: 

The movie camera is connected to a 
personal computer that does not support 
USB 2.0. (Refer to the operating instructions 
for PC connection.)

CAN NOT USE USB: 

You are connecting the USB cable with the 
DV cable connected.

CHANGE TO MANUAL MODE:

You are attempting to select the item on the 
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].

CAN NOT OPERATE (MOTION DV MODE):

You are attempting to change [D.ZOOM] 
setting during MotionDV Mode.

REVERSE THE LCD MONITOR:

When the LCD monitor is rotated by 180° 
towards the lens, the brightness of the LCD 
monitor cannot be adjusted.

TURN OFF THE VIDEO LIGHT:

You are attempting to select an item in 
[SCENE MODE] when light is on.

CANCEL NIGHT VIEW MODE:

You are attempting to select an item other 
than [OFF] in [SCENE MODE] during night 
view mode.

LSQT1006ENG.book  40 ページ  ２００５年１２月９日　金曜日　午前１１時１７分