3com iCV-01a Benutzerhandbuch

b.  Square – The camera will patrol along the user defined boundary in a clock 

wise manner. 

c.  Pan only – The camera will perform Pan function only. 

d.  Tilt only – The camera will perform tilt function only. 

e.  In sequence (1-5) – The camera will jump to each Hotspot location in 

sequence and wait for 10 seconds in each spot.   

 

Use this to define the Pan and Tilt speed.  By default this is set to 10, the 
fastest setting.    The administrator can further customize by choosing different 
Pan / Tilt speed. 

 

This option determines WebCAM Network settings. 

 

By default, the IP address acquisition is set to using DHCP. 

 

Fig.16  WebCAM IP Address Settings 

This determines WebCAM LAN IP address. 

 

Subnet Mask 

Enter WebCAM Subnet Mask. The value is normally 255.255.255.0 

 

This item is to set WebCAM Gateway. 

To learn more about the above, see Appendix C: IP address, Subnet and 
Gateway 

 

 

Obtain an IP address 

This allows the user to choose either to set WebCAM LAN IP address; manually, 
using DHCP (default) or using Bootp protocol. 

Note: 
Click Apply to confirm.    WebCAM will reboot.    You MUST manually enter the NEW
IP address in your Browser in order to open the Web Interface.