Sharp VL-NZ100S Benutzerhandbuch

Use the menu screens to adjust the various
camcorder settings.

Set to the desired
camcorder mode
(see page 19).

• See pages 4 and 5

for the menu items
you can select in
each camcorder
mode.

• Steps 2 to 5 show how to change the

DGTL ZOOM menu setting in TAPE-
CAMERA mode.

Press the MENU button until the menu
screen appears.

Press l or m on the Operation button
to select the desired menu screen (Y),
then press the SET button.

• You can press k, instead of the SET

button.

Press l or m to select the desired
menu item (DGTL ZOOM), then press
the SET button.

• You can press k, instead of the SET

button.

Press l or m to select the desired
menu setting, then press the SET
button.

• You can press k, instead of the SET

button.

• To adjust another menu item, press l or

m

 to select “RETURN” and press the

SET button, then perform steps 3 to 5.

Press the MENU button.

Notes:
• Certain menu items are common to all

camcorder modes. If the BEEP menu item, for
example, is set to “OFF” in TAPE-CAMERA
mode, it will be automatically set to “OFF” in
other modes.

• The menu screen automatically turns off if no

settings are made within five minutes.

• Items that are not selectable are greyed out.

Note:
• The menu screen does not appear during

recording.

MENU button

Lock button

Example

SET button

Media Selection switch

Operation button

Power switch

Example

Example

VL-NZ100H-026-030

02.2.14, 10:00 AM

26