Sony Ericsson P910 Benutzerhandbuch

Set the P900 in 

 for

•

Synchronization

•

Installation of software

•

Backup and restore

Set the P900 in 

 when using

•

P900 as a modem

•

Dial-up network wizard

You should disable the USB cable connection in these three 
cases. In your PC select 

 and disable the COM port to 

which the cable is connected.

Sony Ericsson Update Service (SEUS), is a way for the end user 
to update the firmware of their phone on their own, using a 
SEMC desk stand and any Internet-connected (preferably via 
broadband) PC.

1. Connect the desk stand to your PC.

2. Visit the Sony Ericsson customer support site on the Web.

3. Download the SEUS application and run it. 

Detailed instructions on how to proceed with the update 
sequence is displayed. You can also take a backup of the 
P900. 

When connecting via the infrared port, make sure that both 
devices are placed within one metre from each other and that the 
infrared ports have a free line of sight between them.

Both your P900 and the device you connect to must have their 
infrared ports activated before communication can begin.

1. Go to 

.

2. Set the P900 to 

 or 

 as required.

3. Set the port state to 

 or 

You can also change the infrared port state with the Flip closed, 
in the 

 application.

1. Right click 

 in the status area to the right on the taskbar.

2. Select 

3. Select the Infrared check box

4. Click 

.

Note Clear the Infrared check box when ready.