Sony HDR-XR520 Benutzerhandbuch

Seite von 136
110
Table of C
on
ten
ts
U
seful R
ec
or
ding 
Techniques
Inde
x
problem persists, replace the battery pack with 
a new one (p. 130).
The indicated time may not be correct 
depending on the environment of use.
The battery pack is quickly discharged.
The ambient temperature is too high or low. 
This is not a malfunction.
The battery pack has not been charged 
enough. Fully charge the battery again. If the 
problem persists, replace the battery pack with 
a new one (p. 130).
LCD screen/viewfinder
Menu items are grayed out.
You cannot select grayed items in the current 
recording/playback situation.
There are some functions you cannot activate 
simultaneously (p. 114).
The buttons do not appear on the touch 
panel.
Touch the LCD screen lightly.
Press DISP on your camcorder (or DISPLAY 
on the Wireless Remote Commander) (p. 38).
The buttons on the touch panel do not 
work correctly or do not work at all.
Adjust the touch panel ([CALIBRATION]) 
(p. 131).
The image in the viewfinder is not clear
Move the viewfinder lens adjustment lever 
until the image appears clearly (p. 31).
The image in the viewfinder has 
disappeared.
Close the LCD panel. Even if the viewfinder 
is pulled out, no image is displayed in the 
viewfinder when the LCD panel is open 
(p. 31).

“Memory Stick PRO Duo” media
Operations using the “Memory Stick PRO 
Duo” media cannot be performed.
If you use “Memory Stick PRO Duo” media 
formatted on a computer, format it again on 
your camcorder (p. 72).
Images stored on the “Memory Stick PRO 
Duo” media cannot be deleted.
The maximum number of images that you can 
delete on the index screen at one time is 100.
You cannot delete the protected images.
The data file name is not indicated 
correctly or flashes.
The file is damaged.
The file format is not supported by your 
camcorder (p. 129).
Recording
Refer also to “Memory Stick PRO Duo” 
media (p. 110).
Pressing START/STOP or PHOTO does not 
record images.
The playback screen is displayed. Press MODE 
to turn on the   (Movie) or   (Photo) lamp 
(p. 25).
Your camcorder is recording the image you 
have just shot on the recording media. You 
cannot make new recording during this 
period.
The recording media is full. Delete 
unnecessary images (p. 57).
Total number of movie scenes or photos 
exceeds the recordable capacity of your 
camcorder (p. 120). Delete unnecessary 
images (p. 57).
While [DROP SENSOR] is activated (p. 99), 
you may not record images.
The temperature of your camcorder is 
extremely high. Turn off your camcorder and 
leave it for a while in a cool place.