Sony HVR-Z1E/Z1P Benutzerhandbuch
G:\HDR_HVR\HVR_Kaihan\2514607111\2514607121HVRZ1E\01GB04REC.fm
master:Right
Rec
o
rdin
g
HVR-Z1E/Z1P
2-514-607-12(1)
Recording
47
4
Select the
(IN/OUT REC) menu
by turning the SEL/PUSH EXEC dial,
then press the dial.
then press the dial.
5
Select [EXT REC CTRL] by turning
the SEL/PUSH EXEC dial, then press
the dial.
the SEL/PUSH EXEC dial, then press
the dial.
6
Select [REC CTL MODE] by turning
the SEL/PUSH EXEC dial, then press
the dial.
the SEL/PUSH EXEC dial, then press
the dial.
7
Select a recording control mode by
turning the SEL/PUSH EXEC dial,
then press the dial.
turning the SEL/PUSH EXEC dial,
then press the dial.
[OFF]
The connected device does not record.
The connected device does not record.
[SYNCHRONOUS]
The connected device is linked to the
camcorder, and therefore records the
picture and sound simultaneously with the
camcorder. (
The connected device is linked to the
camcorder, and therefore records the
picture and sound simultaneously with the
camcorder. (
is displayed.)
[RELAY]
When the tape in the camcorder has almost
run out, recording of the picture and sound
is relayed to the connected device and the
remainder of the recording is saved there.
(
When the tape in the camcorder has almost
run out, recording of the picture and sound
is relayed to the connected device and the
remainder of the recording is saved there.
(
is displayed.)
8
Select [STBY COMMAND] by turning
the SEL/PUSH EXEC dial, then press
the dial.
the SEL/PUSH EXEC dial, then press
the dial.
9
Select the state of the connected device
in the recording stop mode by turning
the SEL/PUSH EXEC dial, then press
the dial.
in the recording stop mode by turning
the SEL/PUSH EXEC dial, then press
the dial.
[REC PAUSE]
When the camcorder stops recording, the
connected device pauses recording.
When the camcorder stops recording, the
connected device pauses recording.
[STOP]
When the camcorder stops recording, the
connected device stops recording.
When the camcorder stops recording, the
connected device stops recording.
10
Press REC START/STOP to start
recording.
recording.
11
Press MENU to hide the menu screen.
To stop recording
Press REC START/STOP again.
b
Note
• When [REC FORMAT] is set to [HDV1080i], and
[HDV
tDV CONV] in [i.LINK CONV] to [ON],
pictures at the very beginning of recording will be
distorted and flow to the connected device via the
i.LINK cable. When you shoot pictures on this
camcorder, it is recommended that you start with
scenes that will not be used in the final cut.
distorted and flow to the connected device via the
i.LINK cable. When you shoot pictures on this
camcorder, it is recommended that you start with
scenes that will not be used in the final cut.
• You cannot control the connected device during
frame recording.
• When the camcorder is unable to communicate with
the connected device,
and
are not
displayed.
• Following functions work only when [REC CTL
MODE] is set to [OFF]:
– EXPANDED FOCUS
– [ALLSCAN MODE]
– EXPANDED FOCUS
– [ALLSCAN MODE]
z
Tip
• To replace the tape on this camcorder while keeping
the connected device in the recording mode,
continue shooting until it stops automatically at the
end of tape. Then replace the tape.
continue shooting until it stops automatically at the
end of tape. Then replace the tape.
01GB04REC.fm Page 47 Thursday, June 9, 2005 8:43 PM