Sony EV-H100s Benutzerhandbuch
56
Specifications
The VISCA RS-422 connector pin
assignments
assignments
Using the VISCA RS-422 connector
plug
plug
1
Insert a wire (AW G Nos. 28 to 18)
into the desired wire opening on the
supplied VISCA RS-422 connector
plug, and tighten the screw for that
wire using a flat-head screwdriver.
into the desired wire opening on the
supplied VISCA RS-422 connector
plug, and tighten the screw for that
wire using a flat-head screwdriver.
2
Insert the VISCA RS-422 connector
plug into the VISCA RS-422
connector on the rear of the camera.
plug into the VISCA RS-422
connector on the rear of the camera.
• In order to stabilize the voltage level
of the signal, connect both ends to
GND.
GND.
• Do not make a VISCA RS-232C
connection when there is already an
existing VISCA RS-422 connection.
existing VISCA RS-422 connection.
Using the VISCA RS-422
connector pin assignments
connector pin assignments
Pin No.
Function
1
TXD IN+
2
TXD IN–
3
RXD IN+
4
RXD IN–
5
GND
6
TXD OUT+
7
TXD OUT–
8
RXD OUT+
9
RXD OUT–
1 2 3 4 5
VISCA RS-422
6 7 8 9
Notes
Wire
Flat-head screwdriver
1 2
3 4
5 6
7 8
9