Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. DCR-DVD703E
  5. Benutzerhandbuch

Sony DCR-DVD703E Benutzerhandbuch

Download
Seite von 119
68
DCR-DVD92E/DVD202E/DVD203E/DVD403E/DVD602E/DVD653E/DVD703E/
DVD803E 2-587-623-11 (1)
REMOTE CTRL (Remote control) 
(Except for DCR-DVD92E/DVD602E)
The default setting is [ON] so that you can 
use the Remote Commander (p. 41).
•
  Set to [OFF] to prevent your camcorder 
from responding to a command sent by other 
equipment’ remote control.
•
  The setting returns to [ON] when you have 
the power source disconnected from your 
camcorder for more than 5 minutes.
REC LAMP (Recording lamp)
The camera recording lamp will not light 
up during recording when you set this to 
[OFF]. (The default setting is [ON].)
BEEP
   ON
A melody sounds when you start/stop 
recording, or operate the touch panel.
     OFF
Cancels the melody.
DISP OUTPUT
   LCD PANEL
Shows displays such as the counter on the 
LCD screen and in the viewfinder.
     V-OUT/PANEL
Shows the display also on the TV screen.
SETUP ROTATE
   NORMAL
Scrolls the setup items downwards by 
touching 
.
     OPPOSITE
Scrolls the setup items upwards by 
touching 
.
DATE/TIME
 Date
 Time
•
   appears for an image recorded using a flash.
•
  The data code is displayed on the TV screen if 
you connect your camcorder to a TV.
•
  The indicator toggles through the following 
sequence as you press DATA CODE on 
the remote commander: DATE/TIME 
 
CAMERA DATA 
 OFF (no indication) 
(Except for DCR-DVD92E/DVD602E). 
•
  Depending on the disc condition, Bars [--:--:--] 
appear.
•
  The setting returns to [OFF] when you have 
the power source disconnected from your 
camcorder for more than 5 minutes.
DISC REMAIN
   AUTO
Displays the remaining disc indicator for 
about 8 seconds in situations such as those 
described below.
•
  When you check the disc remaining by 
sliding the POWER switch down  to 
(Movie) or 
(Still).
•
  When you set the POWER to 
(Movie) 
or 
(Still), then press the DISP/BATT 
INFO to switch the indicator off to on.
•
  When the remaining capacity of the disc is 
less than 5 minutes for 
(Movie) or 30 
images for 
(Still).
•
  When you start recording from the line 
input.
     ON
Always displays the remaining disc 
indicator.
STANDARD SET (continued)