Sony DCR-TRV18E Benutzerhandbuch

• The cassette has no cassette memory.

c Use a cassette with cassette memory. (p. 130)

• The cassette memory is full.

c Erase unwanted title. (p. 133)

• The cassette is set to prevent accidental erasure.

c Slide the write-protect tab so that red portion is not visible.

(p. 34)

• The tape has a blank portion between recorded portions.

c Superimpose the title to a recorded portion. (p. 130)

• The cassette has no cassette memory.

c Use a cassette with cassette memory. (p. 137)

• The cassette memory is full.

c Erase unwanted titles. (p. 133)

• The cassette is set to prevent accidental erasure.

c Slide the write-protect tab so that red mark is not visible.

(p. 34)

• The input selector on the VCR is not set correctly.

c Check the connection and set the input selector on the VCR

again (p. 104)

• The camcorder is connected to DV equipment of other than

Sony using the i.LINK cable (DV connecting cable).

c Set it to IR (p. 111).

• Setting programme on a blank portion of the tape is attempted.

c Set the programme again on a recorded portion (p. 115).

• The camcorder and the VCR are not synchronised.

c Adjust the synchronization (p. 113).

• The IR SETUP code is incorrect.

c Set the correct code (p. 107).

• Setting programme on a blank portion of the tape is attempted.

c Set the programme again on a recorded portion (p. 175).

• COMMANDER is set to OFF in the menu settings.

c Set it to ON. (p. 242)

• Something is blocking the infrared rays.

c Remove the obstacle.

• The batteries are inserted in the battery holder with the + –

polarities incorrectly matching the + – marks.

c Insert the batteries correctly. (p. 299)

• The batteries are dead.

c Insert new ones. (p. 299)

• DISPLAY is set to V-OUT/LCD in the menu settings.

c Set it to LCD. (p. 242)

*

Except DCR-TRV16E/TRV116E

*

DCR-TRV25E/TRV27E/TRV116E/TRV118E only

(continued on the following page)

The title is not recorded.

The cassette label is not recorded.

Digital program editing to a tape
does not function.

Digital program editing to a
“Memory Stick” does not
function.*

The Remote Commander supplied
with your camcorder does not work.

The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.*