Sanyo VPC-HD2000 Benutzerhandbuch

English

HINT
To cancel printing
1 During printing, toggle the SET button down.

h The confirmation screen to cancel printing appears. 

2 Select “CANCEL” and press the SET button.

h If “EXIT” is selected and the SET button is pressed, printing resumes.

i Printing is not possible if there are more than 999 images in the card.
i Delete unwanted images before printing.

i DPOF printing is not possible if your printer is not DPOF-compatible.

i The printer setting parameters shown on the Printer Settings Screen will 

differ depending on the printer that is connected.

i To use printer values that do not appear on your camera’s Printer Settings 

Screen, select “Y”.

i If a function set by the camera is not available in the printer, the camera’s 

printer setting will automatically change to “Y”.

i When connecting the cables, make sure that the cable plugs are correctly 

oriented and that they match the shapes of the terminal sockets on the 
devices. Push the plugs in straight when connecting them. If undue force is 
used to connect a cable, it may permanently damage the connector pins in 
the terminal socket.

i Do not use excessive force when connecting and disconnecting cables.

i If the power to the printer is turned off while it is connected, the camera 

may not operate correctly. If the camera does not operate correctly, 
disconnect the USB interface cable, turn off the camera, and then 
reconnect the cable.

i During PictBridge printing, the camera’s button operation response is 

slower.

i If the camera is powered by the battery pack for printing, make sure that 

the remaining battery charge is sufficient.