Samsung HMX-H200LP Benutzerhandbuch

t *GZPVDBOOPUVTFBNFNPSZDBSEUIBUIBT

been used with another device, format it 
with your camcorder. Note that formatting 
erases all information on the memory card.

t "NFNPSZDBSEIBTBDFSUBJOMJGFTQBO*G

you cannot record new data, you have to 
purchase a new memory card.

t %POPUCFOE ESPQ PSDBVTFTUSPOHJNQBDU

to the card.

t %POPUQMBDFGPSFJHOTVCTUBODFTPOUIF

memory card terminals. Use a soft dry 
cloth to clean the terminals if required.

t %POPUQBTUFBOZUIJOHPUIFSUIBOMBCFM

provided with the card on the label pasting 
section.

t #FDBSFGVMUPLFFQUIFNFNPSZDBSEPVUPG

the reach of children, who might swallow 
it.

t 4BNTVOHJTOPUSFTQPOTJCMFGPSEBUBMPTT

due to misuse.

t 8FSFDPNNFOEVTJOHBNFNPSZDBSE

case to avoid losing data from moving and 
static electricity.

t "GUFSBQFSJPEPGVTF UIFNFNPSZDBSE

may get warm. This is normal and is not a 
malfunction.

The camcorder supports SD and 
SDHC memory cards for data storage 
preference!
The data storage speed may differ, 
according to the manufacturer and 
production system.
t 4-$ TJOHMFMFWFMDFMM TZTUFNGBTUFS

write speed enabled.

t .-$ NVMUJMFWFMDFMM TZTUFNPOMZ

lower write speed is supported.

For best results, we recommend using a 
memory card that supports faster write 
speed.
Using a lower write speed memory card 
for recording video may cause diffi culties 
when storing.
You may even lose your video data during 
the recording.
In an attempt to preserve any bit of the 
recorded video, the camcorder forcibly 
stores the video on the memory card and 
displays a warning: 
i-PXTQFFEDBSE1MFBTFSFDPSEBUB
MPXFSSFTPMVUJPOw
If you are unavoidably using a low speed 
memory card, resolution and quality of 
the recording may be lower than the set 
value. 

page 54

The higher the resolution and quality, the 
more memory will be used.

getting ready to start recording