Sanyo VPC-CG6 Benutzerhandbuch

English

i If the focus range (page 76) is set to a 

setting other than manual -, a target 
mark & on the monitor shows the area 
the camera is focusing on.

i The camera automatically determines the 

correct focus by measuring from 9 
different focus points within the shooting 
area. If the target mark is at a position 
that is different from the point you wish to 
focus on, you can refocus, for example, 
by changing the shooting angle.

i The large target mark appears when 

the camera focuses on a wide area in 
the center of the screen.

i A green focus indicator appears when 

the subject is successfully focused, or a 
red focus indicator when the camera 
was not able to focus the subject.

i When the camera focuses and the target 

mark appears, at the same time, the 
shutter speed and aperture settings are 
also displayed. You can use them as a 
reference when shooting.

If the camera shake icon > appears...

i During still image shooting, if the 

shutter speed is slow and the 
possibility that the image may be 
blurred due to camera shake becomes 
high, the camera shake icon may 
appear on the monitor. In this case, 
stabilize the camera when shooting, or 
set the flash operation mode to 
automatic (page 70).

i When shooting with the scene select 

function set to the fireworks + 
mode, the camera shake icon always 
appears, but this is normal.

Shutter speed

Aperture

Target mark

Focus indicator

Camera shake icon