Hitachi DZ-B35A Benutzerhandbuch

English

Operating sound is 
heard cyclically.

This sound is heard because the disc is cyclically operated and 
does not indicate a fault.

—

Some vibrations are felt 
or slight sound is heard 
from mechanism.

These vibrations or sound are caused by disc drive: This does 
not indicate a fault.

—

• No operation can be 

performed because 
the ACCESS/PC or 
CARD ACCESS 
indicator on this DVD 
video camera/
recorder remains lit or 
blinking.

• After disc or card is 

inserted, it takes 
some time until 
recording is possible.

In the following cases, it will take more time than usual until 
operation is possible:
• Immediately after a disc or card is reinserted.
• When a long time has elapsed since the DVD video camera/

recorder was turned off last.

• When the temperature is greatly different from the status of 

previous recording.

• When disc with scratches, dirt or fingerprints is inserted.
• When disc is subject to severe vibrations.
• When the battery or DC power cord was disconnected instead 

of following the correct procedure using power switch to turn 
the DVD video camera/recorder off.

—

No image in viewfinder.

Is LCD monitor open?
No image will appear in viewfinder unless the LCD monitor is 
closed and securely locked to DVD video camera/recorder.

—

No image appears on 
the LCD screen or in 
the viewfinder.

• Is DVD video camera/recorder connected to PC using PC 

connection cable?
Unplug the PC connection cable.

• Does DVD video camera/recorder stop at the end of the scene 

to which wipe-out was set and played back?
Press the DISC NAVIGATION button.

• Is the DVD video camera/recorder set to the sleep/restart 

status?

—