Hitachi DZ-B35A Benutzerhandbuch

Seite von 167
English
22
REMOVING BATTERY FROM REMOTE CONTROL
1
While pushing the battery holder, slide the 
battery out.
Warning
:
• KEEP THE BATTERY AWAY FROM CHILDREN AND 
PETS.
• IF SWALLOWED, CONSULT A PHYSICIAN 
IMMEDIATELY FOR EMERGENCY TREATMENT.
• BATTERY MAY EXPLODE IF NOT HANDLED 
PROPERLY. DO NOT RECHARGE, DISASSEMBLE 
OR DISPOSE OF IN FIRE.
Note
:
• Replace the battery with a Hitachi Maxell, Sony, 
Panasonic, Sanyo, Toshiba CR2032, or Duracell 
DL2032. Use of another battery may present a risk of 
fire or explosion.
• Dispose of battery safely in accordance with local 
laws. Do not dispose of in fire.
• Do not short circuit the battery.
• Do not hold the battery with the metallic tweezers.
• Keep the battery in a dark, cool, dry place.
Using remote Control
Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote 
controllable distance is up to 16 feet (5 m).
Note
:
• When using the remote control, make sure that the 
infrared receiver on DVD video camera/recorder is 
not exposed to direct sunlight or any intense light. If 
the infrared receiver is subject to light stronger than 
the infrared light from remote control, the DVD video 
camera/recorder cannot be operated by remote 
control.
• If there is an obstacle between the remote control and 
infrared receiver on DVD video camera/recorder, 
remote control may not be possible.
• The DVD video camera/recorder uses the “VCR2” 
remote control code of Hitachi VCRs. If you use a 
Hitachi VCR, etc. with remote control code set to 
“VCR2”, a VCR placed near the DVD video camera/
recorder will also be operated by the remote control: 
To prevent this, change the remote control code of the 
VCR.
• The remote control (DZ-RM4W) and lithium battery 
(CR2032) are supplied only with the DZ-GX3300A/
GX3200A/BX37A.