Hitachi DZ-HS903A Benutzerhandbuch
79
Va
rious
Rec
Rec
or
di
ng
T
echn
ique
s
ique
s
Switching capture
quality
quality
1
During record pause, press MENU.
2
Select “Record Functions Setup”
“PHOTO Input”
“Frame”/“Field”
“Frame”/“Field”
3
Press the confirmation button to
confirm, then MENU to end.
confirm, then MENU to end.
Using the Self-Timer
You can use the self-timer to record
still photos.
still photos.
1
During still picture record pause,
press MENU.
press MENU.
2
Select “Record Functions Setup”
“Self Timer”
“On”
3
Press the confirmation button to
confirm, then MENU to exit the
Menu.
The self-timer is set and “q10”
appears in the LCD monitor (p.42).
confirm, then MENU to exit the
Menu.
The self-timer is set and “q10”
appears in the LCD monitor (p.42).
Hint
You can confirm the current
“PHOTO Input” mode by the icon
appearing on the LCD screen
(p.42).
“PHOTO Input” mode by the icon
appearing on the LCD screen
(p.42).
CARD
4
Press PHOTO/SELECT halfway
to adjust the focus, then press it all
the way down.
A countdown starts. In the LCD
monitor, the countdown is
shown as follows: “
to adjust the focus, then press it all
the way down.
A countdown starts. In the LCD
monitor, the countdown is
shown as follows: “
q
10”, “
q
9”,
…. The photo will be recorded
about 10 seconds later.
During countdown, the
recording indicator on the lens
side also flashes.
• To cancel the countdown and
about 10 seconds later.
During countdown, the
recording indicator on the lens
side also flashes.
• To cancel the countdown and
return to “
q
10”, press
PHOTO/SELECT
or C.
• The self-timer operates every
time PHOTO/SELECT is
fully pressed and will not be
set to “Off” until the following
is conducted:
– Set the self-timer to “Off” in
fully pressed and will not be
set to “Off” until the following
is conducted:
– Set the self-timer to “Off” in
the Menu.
– Turn off the power.
– Switch to movie recording.
– Switch to movie recording.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 79 Friday, September 12, 2008 8:22 PM