Sony BDVN5200W Benutzerhandbuch
47
US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\080OTH.fm
(PMRF 01)\4485799121_US (U2)\080OTH.fm
masterpage:
Right
O
ther Operations
10
Press V/v to select [OK] or
[Cancel], then press
[Cancel], then press
.
x
The measurement is OK.
Disconnect the calibration mic, then
select [OK]. The result is
implemented.
select [OK]. The result is
implemented.
x
The measurement is not OK.
Follow the message, then select
[OK] to retry.
[OK] to retry.
You can change the unit of measurement
(feet or meters) by pressing the color
button (RED).
(feet or meters) by pressing the color
button (RED).
Setting the Speakers
[Speaker Settings]
To obtain optimum surround sound, set
the speakers’ distance from your
listening position.
the speakers’ distance from your
listening position.
1
Press HOME.
The home menu appears on the TV
screen.
The home menu appears on the TV
screen.
2
Press B/b to select
[Setup].
3
Press V/v to select [Audio
Settings], then press
Settings], then press
.
4
Press V/v to select [Speaker
Settings], then press
Settings], then press
.
The [Select speaker layout.] display
appears.
appears.
5
Press V/v to select setting
according to your speakers
placement, then press
according to your speakers
placement, then press
.
• [Standard]: The surround
speakers are installed in the rear
position.
position.
• [All Front]: All speakers are
installed in the front position.
All settings are reset to default
settings each time you change the
speaker layout setting.
settings each time you change the
speaker layout setting.
6
Press B/b to select [OK] or
[Cancel], then press
[Cancel], then press
.
7
Press V/v to select the item, then
press .
press .
8
Press V/v to adjust the parameter.
9
Press B/b and
to confirm the
settings.
Check the following settings.
Check the following settings.
x
[Center Speaker]
[On]: The center speaker is connected.
[Off]: The center speaker is not
connected.
[Off]: The center speaker is not
connected.
x
[Distance]
When you move the speakers, be sure
to set the parameters of the distance
from the listening position to the
speakers.
You can set the parameters from 0 to
23 feet (0.0 to 7.0 meters).
to set the parameters of the distance
from the listening position to the
speakers.
You can set the parameters from 0 to
23 feet (0.0 to 7.0 meters).
[Front Left/Right] 10 ft/3.0 m: Set the
front speaker distance.
[Center] 10 ft/3.0 m: Set the center
speaker distance. This setting is only
available when [Center Speaker] is set to
[On].
[Surround Left/Right] 10 ft/3.0 m: Set
the surround speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the
subwoofer distance.
front speaker distance.
[Center] 10 ft/3.0 m: Set the center
speaker distance. This setting is only
available when [Center Speaker] is set to
[On].
[Surround Left/Right] 10 ft/3.0 m: Set
the surround speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the
subwoofer distance.
You can change the unit of measurement
(feet or meters) by pressing the color
button (RED).
(feet or meters) by pressing the color
button (RED).
Tip
Note
Tip