Marantz UD7006 Benutzerhandbuch

30

ENGLISH

n System requirements

Internet connection via broadband.

A device that connects to the broadband and conducts communications on the Internet.
Some modems also incorporate a router.

When using the unit, we recommend a router with the following features.
• Built-in DHCP (Dynamic Host Configuration Protocol) server.

This function automatically assigns an IP address on the LAN.

• Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)

• OS

Windows® XP Service Pack2 or more or Windows Vista

• Software

Server software supporting Windows Media Player ver.11 or DLNA.

• An ethernet cable is not included with the unit.
• Use only shielded STP or ScTP LAN cable which is available at retailer.
• We recommend a shielded straight cable (normal type) for Ethernet connections.

If you use the flat type or a non-shielded cable, the noise may adversely affect other devices.

n Checking the network connection 

After connection, test the Internet connection with “Connection Test” in “Network” on the GUI menu 
(

vpage 38).

• If “Network is FAILED.” is displayed in the test, check the IP address with “Network” in “Information” 

on the GUI menu, then set “DHCP” to “Manual” (

vpage 38). 

• The unit can use the DHCP function to automatically set up the network.
• When setting up your network manually, after subscribing to an ISP, make the settings according to 

directions in “Network” on the GUI menu (

vpage 38).

• If you connect the unit to a network without a DHCP function, conduct IP address and other settings 

according to “Network” on the GUI menu (

vpage 38).

• The  unit  does  not  support  PPPoE.  If  you  subscribe  to  a  service  that  is  set  with  PPPoE,  a  PPPoE

 

compatible router is required.

• When setting up the network manually, consult with your network administrator for the settings to 

make.

n Registering the connected device for the network 

For playing files stored on a device connected via a network, the device must have the unit registered 
in advance. 
• For registering, refer to the operation manual supplied with the server. 

For Internet connections, use an ISP (Internet Service Provider). Ask your local dealer for details.

• Do  not  connect  an  NETWORK  connector  directly  to  the  LAN  port/Ethernet  connector  on  your 

computer.

• It  is  necessary  to  subscribe  to  an  ISP  in  order  to  connect  to  the  Internet.  If  you  already  have  a 

broadband connection, there is no need to subscribe anew.

• The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.
• Marantz assumes no responsibility whatsoever for any communication errors or problems resulting 

from customer's network environment or connected devices.