Lg Electronics BD678N Benutzerhandbuch

15

Installation

In

st

a

lla

tio

n

• If a connected HDMI device does not accept 

the audio output of the player, the HDMI device
’s audio sound may be distorted or may not 
output.

• When you use HDMI connection, you can 

change the resolution for the HDMI output. 
(Refer to “Resolution Setting” on page 17.)

• Select the type of video output from the HDMI 

OUT jack using [HDMI Color Setting] option on 
the [Setup] menu (see page 26).

• Changing the resolution when the connection 

has already been established may result in 
malfunctions. To solve the problem, turn of the 
player and then turn it on again.

• When the HDMI connection with HDCP is not 

verifed, TV screen is changed to black screen. 
In this case, check the HDMI connection, or 
disconnect the HDMI cable.

• IIf there are noises or lines on the screen, please 

check the HDMI cable (length is generally 
limited to 4.5 m (15 ft.)).

•

When you connect a HDMI or DVI 
compatible device make sure of the 
following:

 

- Try switching of the HDMI/DVI device 

and this player. Next, switch on the 
HDMI/DVI device and leave it for around 
30 seconds, then switch on this player.

 

- The connected device’s video input is set 

correctly for this unit.

 

- The connected device is compatible with 

720x

 1280x720p, 1920x1080i or 

576p,

1920x1080p video input.

•

Not all HDCP-compatible HDMI or DVI 
devices will work with this player.

 

- The picture will not be displayed properly 

with non-HDCP device.

 

- This player does not playback and TV 

screen is changed to black screen.

Some functions of this unit are controlled by 
the TV’s remote control when this unit and LG 
TV’s with SIMPLINK are connected through 
HDMI connection.

Controllable functions by LG TV’s remote 
control; Play, Pause, Scan, Skip, Stop, Power Of, 
etc.

Refer to the TV owner’s manual for the details 
of SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as 
shown above.

Depending on the disc type or playing status, 

some SIMPLINK operation may differ from your 
purpose or not work.