Lg Electronics BD678N Benutzerhandbuch

25

Installation

In

st

a

lla

tio

n

4. Use 

 to select a second setup option, 

and press ENTER ( ) to move to the third 
level.

5. Use 

 to select a desired setting, and 

press ENTER ( ) to confirm your selection.

Select a TV aspect ratio option according to 

your TV type.

[4:3 Letter Box]
Select when a standard 4:3 TV is connected. 
Displays theatrical images with masking 
bars above and below the picture.

[4:3 Pan Scan]
Select when a standard 4:3 TV is connected. 
Displays pictures cropped to fill your TV 
screen. Both sides of the picture are cut of.

[16:9 Original]
Select when a 16:9 wide TV is connected. 
The 4:3 picture is displayed with an original 
4:3 aspect ratio, with black bars appearing 
at the left and right sides.

[16:9 Full]
Select when a 16:9 wide TV is connected. 
The 4:3 picture is adjusted horizontally (in a 
linear proportion) to fill the entire screen.

You cannot select [4:3 Letter Box] and [4:3 Pan 

Scan] option when the resolution is set to higher 
than 720p.

Sets the output resolution of the Component 
and HDMI video signal. Refer to page 17 and 
58 for details about the resolution setting.

[Auto]
If the HDMI OUT jack is connected to 
TVs providing display information (EDID), 
automatically selects the resolution 
best suited to the connected TV. If the 
COMPONENT VIDEO OUT is only connected, 
this changes the resolution to 1080i as 
default resolution.

[1080p]
Outputs 1080 lines of progressive video.

[1080i]
Outputs 1080 lines of interlaced video.

Outputs 720 lines of progressive video.

Outputs 576 lines of progressive video.

Outputs 576 lines of interlaced video.