Lg Electronics BP340 Benutzerhandbuch

3 

System Setting

18

S

ys

tem  Se

tting

When you turn on the unit for the first time, the 
initial setup wizard appears on the screen. Set the 
display language and network settings on the initial 
setup wizard.
1. Press 1 (POWER). 

The initial setup wizard appears on the screen.

2. Use w/s/a/d to select a display language 

and press ENTER (b).

3.  Read and prepare the preparations for the 

network settings and then press ENTER (b) 

while [Start] is highlighted.

4.  All available networks are displayed on the 

screen. Use w/s to select a desired SSID of 

wireless network and press ENTER (b).

If you have security on your access point, you 
need to input the security code as necessary.

5. Use w/s/a/d to select the IP mode 

between [Dynamic] and [Static]. 
Normally, select [Dynamic] to allocate an IP 
address automatically.

6.  Select [Next] and press ENTER (b) to apply 

network settings.

Network connection status is displayed on the 
screen.
For details on network settings, refer to 
“Connecting to your Home Network” on page 
15.

7.   Check all the settings that you have set in the 

previous steps.

Press ENTER (b) while [Finish] is highlighted 

to finish the initial setup settings. If there is any 
settings to be changed, use w/s/a/d to 

select 1 and press ENTER (b).