Lg Electronics BP200 Benutzerhandbuch

21

C

onnecting

2. Use w/s/a/d to select the IP mode 

between [Dynamic] and [Static]. 
Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using w/s/

a/d and numerical buttons. If you make a 

mistake while entering a number, press CLEAR 
to clear the highlighted part.

 

,

3.  Select [Next] and press ENTER (b) to apply 

network settings.

Network connection status is displayed on the 
screen.

4.  Press ENTER (b) while [Close] is highlighted to 

finish the wired network settings.

Another connection option is to use an Access Point 
or a wireless router. The network configuration and 
connection method may vary depending on the 
equipment in use and the network environment.

Access point or  
Wireless router

Broadband  
service

Refer to the setup instructions supplied with 
your access point or wireless router for detailed 
connection steps and network settings.
For best performance, a direct wired connection 
from this player to your home network’s router or 
cable/DSL modem is always the best option.  
If you do chose to use the wireless option, note that 
performance can sometimes be affected by other 
electronic devices in the home.