Lg Electronics BP540 Benutzerhandbuch

26

S

ys

tem Se

tting

Each disc has a variety of audio output options. Set 
the player’s Audio options according to the type of 
audio system you use. 

Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 61 for details.

 

,

[Auto]
Select if you connect this unit’s DIGITAL AUDIO 
OUT and HDMI OUT jack to a device with 
LPCM, Dolby Digital, Dolby Digital Plus, Dolby 
TrueHD, DTS and DTS-HD decoder.

[PCM]
Select if you connect this unit’s HDMI OUT jack 
to a device with digital decoder or DIGITAL 
AUDIO OUT jack to a device with two channel 
digital stereo decoder.

[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or 
DIGITAL AUDIO OUT jack to a device with DTS 
decoder. 

 

y When [Digital Output] option is set to 

[Auto], the audio may output as bitstream. 
If the bitstream information is not detected 
from HDMI device with EDID, the audio may  
output as PCM.

 

y If the [Digital Output] option is set to [DTS 

Re-Encode], the DTS Re-Encode audio is 
outputted for BD-ROM discs with secondary 
audio and the original audio is outputted 
for the other discs (like [Auto]).

 

,

[48 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz and 96 kHz 
signal. When this choice is made, this unit 
automatically converts any 192 kHz and 96 kHz 
signals to 48 kHz so your system can decode 
them. 

[96 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz signals. When 
this choice is made, this unit  
automatically converts any 192 kHz signals to 
96 kHz so your system can decode them. 

[192 kHz]
Select this if your A/V Receiver or Amplifier is 
capable of handling 192 kHz signals.

Check the documentation for your A/V Receiver or 
Amplifier to verify its capabilities.

This function allows you to listen to a movie at a 
lower volume without losing clarity of sound.

[Auto]
The dynamic range of the Dolby TrueHD audio 
output is specified by itself.  
And the dynamic range of the Dolby Digital 
and Dolby Digital Plus are operated as same as 
the [On] mode.

[On]
Compress the dynamic range of the Dolby 
Digital, Dolby Digital Plus or Dolby TrueHD 
audio output.

[Off]
Turns off this function.

The DRC setting can be changed only when a 
disc is not inserted or the unit is in complete 
stop mode.

 

,