Panasonic KX-TCD515E Benutzerhandbuch

Seite von 96
10
Setting up
Connection
Plug in the AC adaptor and the telephone 
line cord in order 
1
2
3
.
• The AC adaptor must remain 
connected at all times (It is normal for 
the adaptor to feel warm during use).
• Never install telephone wiring during a 
lightning storm.
• USE ONLY WITH Panasonic 
AC ADAPTOR PQLV19E (Order No. 
PQLV19EZ).
Battery Installation
Please ensure the batteries are inserted 
as shown. 
 part should be inserted first.
Close the cover as indicated by the arrow.
• When you replace the batteries,   part 
should be removed first.
Battery Charge
At the time of shipment, the batteries are 
not charged. To charge, place the 
handset on the base unit. Please charge 
the batteries for about 7 hours before 
initial use. 
During charging, the charge LED will light 
as shown below.
During charging
Fully charged
The handset which power is off will be 
turned on automatically when it is placed 
on the base unit.
The handset will not operate while it is 
on the base unit.
If you do not recharge the handset battery 
for more than 15 minutes, the display will 
flash 
 when the handset is lifted off 
the base unit.
Do not connect the telephone line cord 
to the phone socket 
4
 until the handset 
is fully charged.
LINE
1
4
3
2
Fasten the AC 
adaptor cord to 
prevent it from 
being 
disconnected.
Hook
Hooks
Display icon
Battery strength
High
Medium
Low
Needs to be
charged
Red
Green
515E_E.book  Page 10  Friday, June 27, 2003  2:23 PM