Panasonic KX-TCD515E Benutzerhandbuch

58

To exit the operation, press 

 at any time.

An earth relay can be installed as an option depending on your PBX requirements. 
Please consult our Panasonic Customer Care Helpline for installation. On installation, 
you can then select the flash or earth mode to suit your PBX or network provider.

• The factory preset is “Flash”.

• “Type 1”: 700 ms, “Type 2”: 80 ms, “Type 3”: 400 ms. The factory preset is “Type 

2

”.

You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.

• The factory preset is “Short”.

Press JOYSTICK 
(or move).

Select “

 Setting 

Base

”.

Enter 4-digit Base 
Unit PIN.
(Factory Preset 0000)

Select “Call Option”.

Go to step 5.

Follow steps 1 to 4 shown above, then:

Select “Recall”.

Select “Flash” or “Earth”.

When “Flash” was selected;

Select desired flash type. (see below)

Follow steps 1 to 4 shown above, then:

Select “Pause Time”.

Select “Short” (3 sec.) or “Long” (5 sec.).

515E_E.book  Page 58  Friday, June 27, 2003  2:23 PM