Olympus 048 Benutzerhandbuch

EN 18

Seal the Case

1 Close the Case gently while aligning the mounting projection of the rear lid

and groove.

2 Turn the open/close dial clockwise.

• The Case is sealed.

Check the operation of the loaded camera

After sealing the Case, check that the camera operations normally.
1 Push the ON/OFF button on the Case and confirm that the camera

turns ON/OFF.

2 Press the shutter lever on the Case and confirm that the camera

shutter releases.

• Also operate other control buttons on the Case and confirm that the

camera functions properly.

CAUTION:

• If the open/close dial is not fully turned, the Case will not be sealed. This

will cause water leakage.

• Close the rear lid of the Case so that the lens cap or LCD hood strap

doesn’t catch. If it catches, water leaks may result.

PT-048_EN.book Page 18 Friday, December 11, 2009 4:37 PM