Panasonic KX-TS620W Benutzerhandbuch
13
Settings
For assistance, please visit http://www.panasonic.com/phonehelp
Display Language
You can select “English” or “Español”
as the display language.
Your phone comes from the factory set
to “English”.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
as the display language.
Your phone comes from the factory set
to “English”.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “Change language?”
by pressing {
by pressing {
4
}
or {
3
}
.
3
Press {OK} (Yes key).
4
Select “English” or “Español”
by pressing {
by pressing {
4
}
or {
3
}
.
5
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 2. To
• The display will return to step 2. To
exit the programming mode, press
{
{
EXIT} or wait for 60 seconds.
• You can exit the programming mode any
time by pressing {EXIT}.
Dialing Mode
If you have touch tone service, set to
Tone. If rotary or pulse service is used,
set to Pulse. Your phone default setting
is Tone.
Tone. If rotary or pulse service is used,
set to Pulse. Your phone default setting
is Tone.
Make sure that the handset is on the
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
cradle, the AC adaptor is connected
and the SP-PHONE/HEADSET
indicator light is off.
1
Press {FUNCTION/EDIT}.
2
Scroll to “Program ?” by
pressing {
pressing {
4
}
or {
3
}
and press
{
OK} (Yes key).
3
Scroll to “Set dial mode ?”
by pressing {
by pressing {
4
}
or {
3
}
and
press {OK} (Yes key).
4
Select “Pulse” or “Tone” by
pressing {
pressing {
4
}
or {
3
}
.
(Example: “Tone” is selected.)
5
Press {OK} (Save key).
• A long beep sounds.
• The display will return to step 3. To
• The display will return to step 3. To
exit the programming mode, press
{
{
EXIT} or wait for 60 seconds.
• You can exit the programming mode any
time by pressing {EXIT}.
After recover from power failure, “
” will
flash. Readjust the time and date
.
For Caller ID service users (p. 24)
If a time display service is available with
the Caller ID service:
• The Caller ID information will re-set the
the Caller ID service:
• The Caller ID information will re-set the
clock after the ring if the adjusted time
and/or date is incorrect and the Time
Adjustment set to ON (p. 15). If the time/
date has not previously been set, the
Caller ID information will not adjust the
clock.
and/or date is incorrect and the Time
Adjustment set to ON (p. 15). If the time/
date has not previously been set, the
Caller ID information will not adjust the
clock.
Language
:English
[OK]=Save
Dial mode
:Tone
[OK]=Save
TS620bk01.book Page 13 Wednesday, May 24, 2006 2:31 PM