Panasonic KX-TS620W Benutzerhandbuch

54

The unit does not work.

• Check the settings (p. 9–15).
• Unplug the AC adaptor to reset. Plug in, and try again.

The unit does not ring.

• The ringer volume is set to OFF and “~” is displayed. 

Select the ringer volume to HIGH, MID or LOW by 
pressing {HOLD/RINGER} (p. 14).

You cannot dial.

• Check that the dialing mode selection is correct 

(p. 13).

• The dialed number is restricted. To cancel, 

see page 42.

The other party 
suddenly cannot hear 
your voice during a 
conversation.

• {MUTE} may have been pressed during the 

conversation. If “

” is displayed, press {MUTE}.

You cannot program 
items such as the 
dialing mode.

• Programming is not possible when the handset is off 

the cradle, the SP-PHONE/HEADSET indicator lights, 
or when viewing caller information.

• Do not pause for over 60 seconds while programming.

You cannot store a 
name and phone 
number in memory.

• Programming is not possible when the handset is off 

the cradle or the SP-PHONE/HEADSET indicator 
lights.

• Check the AC adaptor is connected to the unit.
• Do not pause for over 60 seconds while storing.
• Do not enter a phone number more than 32 digits long.
• When using the Call Restriction feature (p. 42), you 

cannot store a phone number in the Direct Dial 
memory ({M1}, {M2} or {M3}) and emergency 
numbers (#).

• If  “

Phonebook full” is displayed, erase other stored 

items from the Phonebook memory (p. 35).

While programming or 
searching, the unit 
starts to ring and stops 
the program/search.

• To answer the call, lift the handset or press 

{

SP-PHONE/HEADSET}. Start again from the 

beginning after hanging up.

TS620bk01.book  Page 54  Wednesday, May 24, 2006  2:31 PM