Panasonic KX-TG5776 Benutzerhandbuch
Multi-unit Operation
64
For assistance, please visit http://www.panasonic.com/help
Auto intercom/Room monitor
This feature allows you to:
– answer an intercom call without pressing
– answer an intercom call without pressing
any buttons on the handset.
– listen to the sound in a room where the
handset is located.
Turning auto intercom on/off
“Off” (Default): Turns this feature off.
“On(Ringer On)”: When an intercom call
is received, the handset rings 2 times then
the speakerphone is automatically turned
on.
“On(Ringer Off)”: When an intercom
call is received, the handset does not ring
and the speakerphone is automatically
turned on. This allows you to easily
monitor a baby’s room, for example, from
different areas of the house.
“Off” (Default): Turns this feature off.
“On(Ringer On)”: When an intercom call
is received, the handset rings 2 times then
the speakerphone is automatically turned
on.
“On(Ringer Off)”: When an intercom
call is received, the handset does not ring
and the speakerphone is automatically
turned on. This allows you to easily
monitor a baby’s room, for example, from
different areas of the house.
1
{
MENU} (middle soft key) i
{#}{
2}{7}{3}
2
Select the desired setting.
3
{
SAVE} i {OFF}
Note:
L
This feature cannot be used when the
base unit is paging all handsets, or when
receiving a transferred call.
base unit is paging all handsets, or when
receiving a transferred call.
Answering an intercom call using auto
intercom
intercom
1
When you are paged by the base unit or
another handset, speak into the
microphone.
another handset, speak into the
microphone.
L
To switch to the receiver, press {C}.
2
To end the intercom, press {OFF}.
Note:
L
Auto intercom cannot be used when:
– all handsets are being paged by the
– all handsets are being paged by the
base unit.
– your handset is receiving a transferred
outside call.
Monitoring audio in a room
With a handset or the base unit, you can
listen to the sound in a room where
another handset is located.
With a handset or the base unit, you can
listen to the sound in a room where
another handset is located.
Important:
L
Before using this feature, set auto
intercom of the destination handset to
“On(Ringer Off)” to allow access by
other handsets.
intercom of the destination handset to
“On(Ringer Off)” to allow access by
other handsets.
1
Call the destination handset (page 63).
L
You can listen to the audio.
2
To mute your sound output, press
{
{
MUTE} if necessary.
3
Press {OFF} to stop monitoring.
1
Call the destination handset (page 63).
L
You can listen to the audio.
2
To mute your sound output, press
{
{
MUTE} if necessary.
3
Press {INTERCOM} to stop monitoring.
Handset
Handset
Handset
Base unit
TG5771_5776_5777.book Page 64 Friday, February 23, 2007 3:52 PM