Panasonic KX-TG5664 Benutzerhandbuch
Making/Answering Calls
20
For assistance, please visit http://www.panasonic.com/phonehelp
Using the base unit
1
{
SP-PHONE}
2
Speak into the MIC.
3
When you finish talking, press {SP-
PHONE}.
PHONE}.
Adjusting the ringer volume
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
Press {^} or {V} repeatedly to select the
desired volume when in standby mode.
L
To turn the ringer off, press and hold {V}
until the unit beeps 2 times.
until the unit beeps 2 times.
Setting the ringer tone
There are 3 tones.
There are 3 tones.
1
Press {^} or {V}.
2
Within 10 seconds, press {<} or {>}
repeatedly to select the desired tone.
repeatedly to select the desired tone.
Useful features during a
call
call
HOLD button
This feature allows you to put an outside
call on hold.
This feature allows you to put an outside
call on hold.
1
Press {HOLD} during an outside call.
L
To transfer the call to another
extension, continue from step 2 on
page 43, “Transferring calls,
conference calls”.
extension, continue from step 2 on
page 43, “Transferring calls,
conference calls”.
2
Press {HOLD} again.
L
To release the hold, press {C}.
L
The base unit user can take the call
by pressing {SP-PHONE}.
by pressing {SP-PHONE}.
L
Another handset user can take the
call by pressing {C}.
call by pressing {C}.
Press {HOLD} during an outside call.
L
To release the hold, press {SP-
PHONE}.
PHONE}.
L
Handset users can take the call by
pressing {C}.
pressing {C}.
Note for handset and base unit:
L
If another phone is connected on the
same line (page 10), you can also take
the call by lifting its handset.
same line (page 10), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
Handset
Base unit
TG5664(e).book Page 20 Monday, March 6, 2006 11:15 AM