Panasonic KT-TG7861AL Benutzerhandbuch
Important:
R Before registering the repeater to this base
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1
M
N (right soft key) #138
2
MbN: Select the desired setting. a MOKN
a MeN
a MeN
Note:
R After turning the repeater mode on or off,
R After turning the repeater mode on or off,
may be displayed on the handset
momentarily. This is normal and the
handset can be used once
handset can be used once
is displayed.
Registering the DECT repeater
(KX-A405AL) to the base unit
(KX-A405AL) to the base unit
Note:
R Please use a repeater that has not yet been
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Press and hold M
Press and hold M
N for about 5 seconds,
until the registration tone sounds.
R The next step must be completed
R The next step must be completed
within 90 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the
Connect the AC adaptor, then wait until
the
indicator and
indicator light
green.
3
Base unit:
To exit the registration mode, press M
To exit the registration mode, press M
N.
R The registration tone stops.
30
Programming
TG786xAL(en)_0111_ver002.pdf 30
2013/01/11 11:36:22