Panasonic KX-FPG377 Benutzerhandbuch
8. Programmable Features
64
To transfer a recorded incoming message to
another telephone (page 58), activate this
feature and program the transfer telephone
number.
another telephone (page 58), activate this
feature and program the transfer telephone
number.
1. Press {MENU}.
2. Press {#}, then {6}{0}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter the transfer telephone number.
6. Press {SET}.
7. Press {MENU}.
Code #61: Checking, recording or erasing the
transfer greeting message
transfer greeting message
TRNS-GREETING
CHECK
CHECK
[
±]
See page 58 for details.
Code #67: Setting the incoming message
monitor
monitor
ICM MONITOR
MODE=ON
MODE=ON
[
±]
To hear an incoming message (ICM) from the
speaker when the answering machine is
recording the message.
“ON” (default): You can monitor the incoming
message.
“OFF”: Deactivates this feature.
speaker when the answering machine is
recording the message.
“ON” (default): You can monitor the incoming
message.
“OFF”: Deactivates this feature.
Code #70: Calling your pager
PAGER CALL
MODE=OFF
MODE=OFF
[
±]
See page 59 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
MODE=ON
MODE=ON
[
±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
L
If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be
adjusted.
adjusted.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
“OFF”: Deactivates this feature.
Code #77: Changing the receiving mode in
the AUTO ANSWER setting
the AUTO ANSWER setting
AUTO ANSWER
MODE=TAM/FAX [
MODE=TAM/FAX [
±]
“TAM/FAX” (default): Telephone Answering
Machine/Fax mode (page 45)
“FAX ONLY”: Fax only mode (page 46)
Machine/Fax mode (page 45)
“FAX ONLY”: Fax only mode (page 46)
Code #80: Resetting advanced features to
their default settings
their default settings
SET DEFAULT
RESET=NO
RESET=NO
[
±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
8.4 Direct commands for
programming features
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 60 to
page 64.
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 60 to
page 64.
1
Press {MENU}.
2
Press {#} and the 2-digit code number.
3
Press the desired direct command, using the
dial keypad, to display the desired setting.
dial keypad, to display the desired setting.
L
This step may be slightly different
depending on the feature.
depending on the feature.
4
Press {SET}.
5
To exit programming, press {MENU}.
8.4.1 Program code and direct
command button
command button
{#}{
0}{0} Quick Setup
–
{
1}: “TAM/FAX” (default)
–
{
2}: “DIST. RING”
–
{
3}: “TEL ONLY”
–
{
4}: “FAX ONLY”
L
Press {SET} 2 times before pressing the
direct command button.
direct command button.
FPG376.book Page 64 Wednesday, July 30, 2003 6:28 PM