Vertical Communications SCS 8324S Benutzerhandbuch

76

Comdial

August, 03

Your system provides an all-call or a zone page feature that you 
access by dialing special codes. This arrangement sounds your voice 
announcement through the telephone speakers or through an external 
paging unit.

Your system installer can interface a dedicated paging port or a spare 
line port with an external paging amplifier. You can then access the 
paging amplifier and select specific zones for paging, if applicable, 
by dialing codes on your station. The dedicated paging port does not 
support any “talk-back’ capability even if such a feature is provided 
by the external equipment.  Your system installer can also arrange a 
line port for external paging interface. The system precedes an 
announcement through the paging port with an alerting tone and 
installers can choose between an intercom tone or a DTMF signaling 
tone for this paging alert tone. They usually choose the intercom tone 
for a soft alert and choose the DTMF tone for a loud alert.

1.  LIFT handset.
2.  PRESS INTERCOM AND CHOOSE one of the following options:

•  DIAL extension number of station equipped and enabled for paging 

(see programming section of this user’s guide), or

•  PRESS paging button assigned by the installer, or
•  DIAL 89 for special paging port.

3.  MAKE announcement.
4.  HANG UP to end.

All-call paging allows you to receive announcements through the 
station speaker at once. The system can also send all-call paging to 
the paging port where it applies it to the input of an external paging 
amplifier. Origination of announcements must be via your station 
handset. The system installer enables your station’s ability to receive 
and originate all-call paging at a station.