Vertical Communications SCS 8324S Benutzerhandbuch

84

Comdial

August, 03

If your LCD speakerphone provides the installer–programmed 
service observing feature, you can use it to monitor a conversation or 
activity at another telephone in an undetected manner. You can use 
this feature while you are in the speakerphone mode or off-hook.

1.  PRESS INTERCOM.
2.  DIAL  #03.
3.  DIAL extension number of telephone to be monitored.
4.  PRESS SPEAKER to end monitoring.
5.  Your system installer may also program a dedicated SERVICE 

OBSERVE button that may be used in place of the feature access 
code.

 

If the telephone service in your locality is pulse (rotary dialing), the 
installer arranges your telephone to dial in this manner. If you need to 
send tones during a dialing sequence (for example, to send bank-by-
telephone tones), you can convert to tone dialing mode while dialing. 
The system will switch back to pulse dialing when you end your call.

You can store a ‘#’ as part of a speed dial number to cause an auto-
matic switch from pulse to tone where needed in a number sequence.

—DIAL  #.