GE 00023598 Benutzerhandbuch

1.  To  prepare for wall mounting, wrap excess 

telephone cord, if any, around the hooks 
provided on the wall mount bracket. Be sure to 
leave enough cord for connecting to the base at 
the top and the wall jack through the center cut 
out of the wall bracket.

2.  Plug the line cord into the jack of the base.
3.  Align the line cord with the small cut out in the 

wall mount bracket.

4.  Align and inset the two sets of small tabs of the wall mount bracket into the base 

at the top. Then gently press into the two sets of bottom grooves until it snaps in 
place.

5.  Connect the small end of the power adapter into the POWER 7.5V AC jack on the 

back of the answerer. Secure the cord of the power adapter in the groove on the 
wall mount bracket.

6.  Carefully turn the handset hook180 with a coin or screwdriver until it points 

upward (the WALL imprint will be right side up). You need to do this so the at the 
handset doesn’t fall out of the base.

7.  Connect the line cord to the wall phone jack, through the center cutout of the wall 

mounting bracket. 

8.  Slip the mounting of the base (on bottom of unit) over the wall plate post and slide 

the base down until the phone is firmly in place.

9.  Plug one end of the coiled cord into the handset. Plug the other end into the jack 

on the side of the base.

10. Place the handset on the base.
11. Plug the AC Power adapter into an AC power outlet. The screen displays 

WAIT… then announces: “Press menu key to set up unit”. The unit is ready for 
Answering System Set Up.