Lucent Technologies 555-670-111 Benutzerhandbuch
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-17
Basic System Operating Conditions
3
Set System Time
3
NOTES:
■
The System Time feature allows you to set the time that appears on
MLX, ETR, and MLS display telephones and on SMDR reports.
MLX, ETR, and MLS display telephones and on SMDR reports.
■
If you are planning to use the SMDR feature, make sure the system time
is set accurately. If you change the system time while the system is in
Night Service mode, Night Service is deactivated and must be manually
reactivated. If you have installed applications such as MERLIN LEGEND
Mail or Intuity AUDIX, you may need to set the time in the applications
software whenever you reset the system time.
is set accurately. If you change the system time while the system is in
Night Service mode, Night Service is deactivated and must be manually
reactivated. If you have installed applications such as MERLIN LEGEND
Mail or Intuity AUDIX, you may need to set the time in the applications
software whenever you reset the system time.
■
In Release 6.0 and later systems, where a MERLIN LEGEND
Communications System is networked in a private network with one or
more MERLIN LEGEND Communications Systems or with one or more
DEFINITY Communications Systems, SMDR reports may report
outgoing calls using more than one call record (especially for tandem
calls), depending upon how SMDR is programmed and how calls are
routed. Therefore, ensure that the system date and time are set
accurately on each system that carries these calls. When you examine
records for network calls, you may need to be aware of time zone
differences among different system locations.
Communications System is networked in a private network with one or
more MERLIN LEGEND Communications Systems or with one or more
DEFINITY Communications Systems, SMDR reports may report
outgoing calls using more than one call record (especially for tandem
calls), depending upon how SMDR is programmed and how calls are
routed. Therefore, ensure that the system date and time are set
accurately on each system that carries these calls. When you examine
records for network calls, you may need to be aware of time zone
differences among different system locations.
Summary: Set System Time
3
Programmable by
System Manager
Mode
All
Idle Condition
Not Required
Planning Form
1, System Planning
Factory Setting
0000
Valid Entries
0000 to 2359
Inspect
No
Copy Option
No
Console Procedure
System
→
Time
→
Drop
→
Dial current time (0000–
2359)
→
Enter
→
Exit
PC Procedure
→
→
7
+
2I
→
Type current time (0000–
2359)
→
→