Lucent Technologies 555-670-111 Benutzerhandbuch
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
New Features and Enhancements
xxii
Release 7.0 Enhancements (April 1999)
programmed to support either T/R or ETR, but not both simultaneously.
This module does not have a separate PFT port. In the event of a power
failure, port 12 becomes the PFT port for line 1. If the port is programmed
for ETR operation, a single-line telephone must be plugged into the port for
operation during power failure.
This module does not have a separate PFT port. In the event of a power
failure, port 12 becomes the PFT port for line 1. If the port is programmed
for ETR operation, a single-line telephone must be plugged into the port for
operation during power failure.
If caller identification is subscribed to from the local telephone company,
the 412 LS-ID-ETR module displays the telephone number of incoming
callers (from supported areas) on ETR and MLS display telephones. In
addition, a button on the ETR and MLS telephone can be programmed to
toggle between displaying caller name or caller number.
the 412 LS-ID-ETR module displays the telephone number of incoming
callers (from supported areas) on ETR and MLS display telephones. In
addition, a button on the ETR and MLS telephone can be programmed to
toggle between displaying caller name or caller number.
■
016 ETR Module. The 016 ETR module provides 16 ETR station ports,
including 6 with T/R functionality and 4 TTRs. On the 016 ETR module, the
first 10 ports are ETR ports only—these ports do not have T/R functionality.
The remaining 6 ports (ports 11 through 16) can be programmed to support
either T/R or ETR, but not both simultaneously.
including 6 with T/R functionality and 4 TTRs. On the 016 ETR module, the
first 10 ports are ETR ports only—these ports do not have T/R functionality.
The remaining 6 ports (ports 11 through 16) can be programmed to support
either T/R or ETR, but not both simultaneously.
Expanded Digital Endpoint Connectivity
0
Release 7.0 increases the maximum number of digital telephones supported from
127 to 200 by introducing a new 016 MLX module. In addition, each of the 200
ports can support an MFM adjunct which increases the current 255 station
endpoints to 400.
127 to 200 by introducing a new 016 MLX module. In addition, each of the 200
ports can support an MFM adjunct which increases the current 255 station
endpoints to 400.
■
016 MLX Module. Each 016 MLX module provides 16 digital station ports
and has an additional 32K of dual port RAM.
and has an additional 32K of dual port RAM.
■
Processor Module. The 016 MLX module can only be utilized with the
CKE4 or later processor module with upgrade to R7.0 software. The CKE4
processor module provides the lead to access the additional 32K of RAM
on the 016 MLX module.
CKE4 or later processor module with upgrade to R7.0 software. The CKE4
processor module provides the lead to access the additional 32K of RAM
on the 016 MLX module.
Voice Announce on Idle Only Option on MLX
Telephones
Telephones
0
Prior to Release 7.0, no options were available for disabling intercom voice
announcements at an MLX telephone when busy. In Release 7.0, a new
option—Voice Announce on IDLE ONLY—is available with the existing Voice
Announce feature. This new option allows a user to receive intercom voice
announcements only when they are not active on another call.
announcements at an MLX telephone when busy. In Release 7.0, a new
option—Voice Announce on IDLE ONLY—is available with the existing Voice
Announce feature. This new option allows a user to receive intercom voice
announcements only when they are not active on another call.