Sharp AR-C260M Benutzerhandbuch
PART NAMES AND FUNCTIONS (The Reversing Automatic Document Feeder)
4-4
Touch Panel (main screen of copy mode)
The main screen of copy mode shows messages and keys necessary for copying and settings that can be selected.
Touch a key to make a selection. The main screen of the copy mode will be displayed when the [COPY] key is
pressed.*
Touch a key to make a selection. The main screen of the copy mode will be displayed when the [COPY] key is
pressed.*
Message display
Basic status messages are displayed here.
[INTERRUPT] key display area
When interrupt copy is available, the
[INTERRUPT] key will be displayed here. When an
interrupt copy job is being run, a [CANCEL] key will
be displayed here to be used for canceling the
interrupt copy job.
[INTERRUPT] key will be displayed here. When an
interrupt copy job is being run, a [CANCEL] key will
be displayed here to be used for canceling the
interrupt copy job.
Copy quantity display
Displays the selected number of copies before the
[START] key is pressed or the number of remaining
copies after the [START] key is pressed. A single
copy can be made when "0" displayed.
[START] key is pressed or the number of remaining
copies after the [START] key is pressed. A single
copy can be made when "0" displayed.
Touch to display the duplex copy mode setting
screen.
screen.
Touch to select sort, group, and staple sort.
[SPECIAL MODES] key (page 6-2)
Touch to display the special modes selection
screen.
screen.
Original feed display
This lights steadily when an original is placed on
the original table of the reversing automatic
document feeder. When "Stream feeding mode" in
the key operator programs is turned on, the display
blinks during the waiting period (about 5 seconds)
for placement of the next original. (See page 10 of
the key operator's guide.)
the original table of the reversing automatic
document feeder. When "Stream feeding mode" in
the key operator programs is turned on, the display
blinks during the waiting period (about 5 seconds)
for placement of the next original. (See page 10 of
the key operator's guide.)
Paper size display
The display shows the location of the paper trays,
the size of the paper in the trays and the
approximate amount of paper loaded in each tray.
The approximate amount of paper in a tray is
indicated by
the size of the paper in the trays and the
approximate amount of paper loaded in each tray.
The approximate amount of paper in a tray is
indicated by
.
Original size display
Displays the original size only when an original is
placed for copying.
placed for copying.
Exposure display
Displays the icon of the selected resolution and the
exposure scale.
exposure scale.
[EXPOSURE] key (page 5-10)
Use this key to adjust the copy exposure.
Paper select display
Displays the selected paper size. When the auto
paper select mode has been selected, "AUTO" will
be displayed.
paper select mode has been selected, "AUTO" will
be displayed.
Use this key to select the paper size.
Copy ratio display
Displays the selected copy ratio.
[COPY RATIO] key (page 5-13)
Use this key to select the copy ratio.
SPECIAL MODES
2-SIDED COPY
OUTPUT
READY TO COPY.
11x17
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
100
%
COPY RATIO
PLAIN
INTERRUPT
ORIGINAL
5½x8½
0
8½x11
8½x11
DUPLEX
8½x11
* Except when the custom
settings screen is displayed.
The screen at left shows the
machine with the reversing
automatic document feeder,
the duplex module/2 x 500
sheet paper drawer, and the
duplex bypass/inverter unit
installed.
The image will vary depending
on the equipment installed.
machine with the reversing
automatic document feeder,
the duplex module/2 x 500
sheet paper drawer, and the
duplex bypass/inverter unit
installed.
The image will vary depending
on the equipment installed.
00-08.book 4 ページ ２００２年１１月８日 金曜日 午前９時３９分