GE 4 Series Benutzerhandbuch

Use this level to arm perimeter doors and windows only. Interior devices such as motion sensors 

remain off so you can stay inside the premises without setting off an alarm. If you wish, you can 

exit through a designated delay door after arming to Level 2—STAY.

1. Close all protected perimeter doors and windows.
2. Press 

2

 at any touchpad. Touchpads display, “ENTER CODE.”

3. Enter your Access Code. Touchpads display, “Armed to STAY” and the system sounds two 

short beeps.

4. If leaving the premises, exit through a designated delay door immediately.

Press the 

 Lock button once to go from Level 1 to Level 2.

Use this level to arm perimeter door/window sensors and interior motion sensors for maximum 

protection. 

1. Close all perimeter doors and windows.
2. Press 

3

 at any touchpad. Touchpads display, “ENTER CODE.”

3. Enter your Access Code. Touchpads display, “ARMED TO AWAY” and the system sounds 

three short beeps.

4. Exit through a designated delay door immediately.

• Press the 

 Lock button twice to go from Level 1 to Level 3, or once to go from Level 2 to 

Level 3.

This feature lets you arm your system without using an access code. Disarming the system still 

requires entering an access code.

From Level 1--Press 2.

From Level 1 or 2--Press 3.

Your system may be set up to let you exit and re-enter the premises within two minutes, without 

disarming and rearming the system. This is useful when you want to quickly step outside to pick 

up the newspaper without disarming your system.

1. When the system is armed to 2—STAY, Press 

D

 at any touchpad (opening the door without 

pressing 

D

 will cause an alarm).

2. Open a designated delay door and go outside. Leave the door open if you are planning to 

3. Return within two minutes and close the door. The system will rearm to 2—STAY.