First Alert 1 Benutzerhandbuch

Seite von 48
– 22 –
 
86(5)81&7,216
Message Recording/Playback/Volume Control
 
 
Recording a Message 
Your system can record a brief message (up to 20 seconds) that can be played back later. 
To record a message: 
FUNCTION
 
 +  
RECORD
 
 
 
The keypad beeps and displays “REC MESSAGE.” Begin speaking into the microphone. 
 
NOTE: The Record function can only be performed from the master keypad.  It cannot be performed from 
any other wireless keypad (ex. 5827). 
 
To stop recording before the end of 20 seconds: Press 
OFF
 
 
 
Otherwise,  the recording automatically stops after 20 seconds.  The keypad beeps twice, the REC display 
turns off, but the MESSAGE display remains on. 
 
Message Playback 
The  lighted  word  MESSAGE  indicates  that  a  new  message  is  in  memory.  After  playing  the  message,  the 
MESSAGE display turns off. See NOTE below if using a wireless keypad. 
 
To play back a message: 
FUNCTION
 
 +  
PLAY
 
 
 
Adjusting the Volume 
The volume level of message playback, system announcements, and status beeps can be changed. You can 
also mute system announcements if desired. See NOTE below if using a wireless keypad. 
 
To adjust message playback/system announcemnt volume: 
 
FUNCTION
 
 +  
VOLUME  
[3] or [6]
 
 
   
  
† [3] = increases volume one level, [6] = decreases volume one level (when pressed the keys beep at the selected volume.) 
 
Repeat the key sequence until the desired volume level is achieved. 
 
To mute system announcements: 
FUNCTION
 
 +  
VOLUME  
 +  
OFF  
 
 
When  muted,  no  system  announcements  will  be  made.    Recorded  messages  will  be  announced,  though, 
when 
PLAY
 
is pressed. 
 
To restore announcement sounding: 
FUNCTION
 
 +  
VOLUME  
[3]  or [6]
 
 
Volume level will be restored to the level that was selected prior to muting the sound. 
 
NOTE:  If a wireless keypad (5827) has been installed and is programmed for quick arming, it cannot be 
used  to  activate  message  playback  or  adjust  the  volume.  In  this  case,  you  must  use  the  master 
keypad to perform these functions.