Emerson F-SERIES SENSOR Benutzerhandbuch

2

Before You Begin 

Full product specifications can be found in the F-Series Product Data Sheet, which is available from the 
Micro Motion web site at www.micromotion.com.

The term MVD

 transmitter refers to the following transmitter models: 

• Models 1500, 1700, 2500, and 2700

• Models 3500 and 3700

The term high-temperature sensor refers to the following F-Series models:

• F025A and F025B

• F050A and F050B

• F100A or F100B

The term extreme high-temperature sensor refer to the following F-Series models:

• F025C and F025E

• F050C and F050E

• F100C and F100E

This Micro Motion product complies with all applicable European directives when properly installed in 
accordance with the instructions in this manual. Refer to the EC declaration of conformity for directives that 
apply to this product.

The EC declaration of conformity, with all applicable European directives, and the complete ATEX 
Installation Drawings and Instructions are available on the internet at www.micromotion.com/atex or 
through your local Micro Motion support center.

Information affixed to equipment that complies with the Pressure Equipment Directive can be found on the 
internet at www.micromotion.com/library.

The F-Series sensor makes up one part of a Coriolis flowmeter. The other part is a transmitter. F-Series 
sensors are available with the following electronics interfaces:

• An integral core processor for connecting to a 4-wire remotely mounted transmitter or to a 

user-supplied remote host (Figure 1). 

• An integral Model 1700 or 2700 transmitter (Figure 2). 

• A 9-wire junction box for connecting to a remotely mounted transmitter or a remotely mounted core 

processor (Figure 3).

• An integrally mounted IFT9701 transmitter (Figure 4).

• High-temperature and extreme high-temperature models are equipped with a flexible conduit, on 

which can be mounted a Model 1700/2700 transmitter, a core processor, or a junction box (Figure 5).