DSCover Satellite Products PC1555MX Benutzerhandbuch
12
[11]
[*][5] Programming Access Codes: A valid master
code must also be entered.
[12]
[*][6] User Functions: A valid master code must also
be entered.
[13]
[*][7][1] Command Output Option #1: A valid
access code may need to be entered.
[14]
[*][7][2] Reset (Command Output Option #2): As
described above.
[15]
General Voice Prompt Help: This feature can only
be programmed if both the Escort5580 and the
PC5928 Audio Matrix module are being used. The
intercoms will perform a Help page. The user must
then press the Page/Answer button on any intercom
station to begin the help session with the Escort.
PC5928 Audio Matrix module are being used. The
intercoms will perform a Help page. The user must
then press the Page/Answer button on any intercom
station to begin the help session with the Escort.
[16]
[*][0] Quick Exit: As described above.
[17]
[*][1] Reactivate Stay/Away Zones
[18]
Identified Voice Prompt Help: Can only be pro-
grammed if both the Escort5580 and the PC5928
Audio Matrix module are being used. The Escort will
begin a help session from the intercom station clos-
est to the keypad. You must also program PC5928
Section [802], subsection [14] “Keypad Port Assign-
ments.” For more information, please refer to the
PC5928 Installation Manual.
Audio Matrix module are being used. The Escort will
begin a help session from the intercom station clos-
est to the keypad. You must also program PC5928
Section [802], subsection [14] “Keypad Port Assign-
ments.” For more information, please refer to the
PC5928 Installation Manual.
NOTE: This function key cannot be programmed for PC55XX
LED keypads with software version 1.0.
LED keypads with software version 1.0.
[19]
[*][7][3] Command Output Option #3: A valid
access code may need to be entered.
[20]
For Future Use
[21]
[*][7][4] Command Output Option #4: A valid
access code may need to be entered.
3.6
Features Available for the LCD5500Z
These features are only available for LCD5500Z keypads with
zone inputs:
zone inputs:
Automatic Scrolling of Alarms in Memory
The LCD5500Z keypad allows automatic scrolling through
alarms in memory while the keypad is idle. This feature, if
enabled, will override the clock display. This option can be
programmed in LCD programming section [66], option [4].
The LCD5500Z keypad allows automatic scrolling through
alarms in memory while the keypad is idle. This feature, if
enabled, will override the clock display. This option can be
programmed in LCD programming section [66], option [4].
24 Hour Time Display Option
The LCD5500Z can be programmed to display time using a
24- hour clock, instead of a 12-hour, am/pm clock. This option
can be programmed in LCD programming section [66], option
[3].
The LCD5500Z can be programmed to display time using a
24- hour clock, instead of a 12-hour, am/pm clock. This option
can be programmed in LCD programming section [66], option
[3].
Keypad Zones
See 2.13 “Keypad Zones” on page 7.
See 2.13 “Keypad Zones” on page 7.
Viewing Troubles While Armed
See “[*][2] Trouble Display” on page 9 for information on how
to view troubles.
See “[*][2] Trouble Display” on page 9 for information on how
to view troubles.
Backlighting Boost
The LCD5500Z and PC55XXZ zone input keypads will provide
extra number pad lighting when any key is pressed. The back-
lighting boost will last for an additional 30 seconds after the
last keypress.
The LCD5500Z and PC55XXZ zone input keypads will provide
extra number pad lighting when any key is pressed. The back-
lighting boost will last for an additional 30 seconds after the
last keypress.
WWW.DIYALARMFORUM.COM