DSCover Satellite Products PC1555MX Benutzerhandbuch
2
1.2
Additional Devices
In addition to the information below, see the back cover for a
DSC module compatibility table.
DSC module compatibility table.
PC5132 Wireless Receiver
The PC5132 Wireless Receiver can be used to connect up to
32 wireless devices to the system. All devices are spread
spectrum, 900 MHz, fully supervised devices which use stan-
dard ‘AAA’ or ‘AA’ alkaline batteries.
Seven devices are available. They are as follows:
The PC5132 Wireless Receiver can be used to connect up to
32 wireless devices to the system. All devices are spread
spectrum, 900 MHz, fully supervised devices which use stan-
dard ‘AAA’ or ‘AA’ alkaline batteries.
Seven devices are available. They are as follows:
WLS904 Wireless Motion Detector:
Adds wireless space pro-
tection to your system
WLS905 Wireless Universal Transmitter:
Adds wireless door
or window contacts to your system.
WLS906 Wireless Smoke Detector:
Adds smoke detection to
your system.
WLS907 Wireless Slimline Universal Transmitter:
A smaller
wireless door or window contact.
WLS908 Wireless Panic Pendant:
Adds personal protection to
the system. When used, the unit will indicate a non-medical emer-
gency to the central station.
gency to the central station.
WLS909 Wireless Key :
Adds a simple and mobile method of
arming and disarming to the system, as well as one-button access to
several programmable functions.
several programmable functions.
WLS910 Wireless Handheld Keypad*:
A portable keypad
which allows arming and disarming from anywhere on the premises.
PC5400 Printer Module
The PC5400 Printer Module allows the panel to print out all
events that occur on the system to any serial printer. The print-
out will contain the time, date and the event that occurred.
The PC5400 Printer Module allows the panel to print out all
events that occur on the system to any serial printer. The print-
out will contain the time, date and the event that occurred.
PC5204 Power Supply Output Module
The PC5204 can provide up to 1 Amp of additional power for
modules or devices connected to the control panel. The mod-
ule requires a 16.5 volt AC 40 VA transformer and 4 AH bat-
tery. In addition, the module provides 4 programmable high
current voltage outputs. Each output is individually program-
mable. (See 5.11 “PGM Output Options” on page 20.) (See
PC5204 Installation Instructions Sheet.)
The PC5204 can provide up to 1 Amp of additional power for
modules or devices connected to the control panel. The mod-
ule requires a 16.5 volt AC 40 VA transformer and 4 AH bat-
tery. In addition, the module provides 4 programmable high
current voltage outputs. Each output is individually program-
mable. (See 5.11 “PGM Output Options” on page 20.) (See
PC5204 Installation Instructions Sheet.)
PC5208 Eight Low Current Output Module
Adds eight low current outputs (50 mA) to the control. Each
output is individually programmable. (See 5.11 “PGM Output
Options” on page 20.) (See PC5208 Installation Instructions
Sheet.)
Adds eight low current outputs (50 mA) to the control. Each
output is individually programmable. (See 5.11 “PGM Output
Options” on page 20.) (See PC5208 Installation Instructions
Sheet.)
Escort5580 Module
This Escort5580 module will turn any touch tone phone into a
fully functional keypad. The module also includes a built-in
interface to control up to 32 line carrier type devices for lighting
and temperature control. (See Escort5580 Installation Manual.)
This Escort5580 module will turn any touch tone phone into a
fully functional keypad. The module also includes a built-in
interface to control up to 32 line carrier type devices for lighting
and temperature control. (See Escort5580 Installation Manual.)
PC5928/PC5936 Audio Interface Modules
The Audio Interface module is a simple way to incorporate
paging, intercom, baby listen-in and door answer to the
PC1555MX control panel . The modules have built-in talk/listen
voice capability for central station. Four additional devices are
available:
The Audio Interface module is a simple way to incorporate
paging, intercom, baby listen-in and door answer to the
PC1555MX control panel . The modules have built-in talk/listen
voice capability for central station. Four additional devices are
available:
PC5921 Intercom Audio Station
Used in conjunction with the PC5928 Audio Interface Module.
Used in conjunction with the PC5928 Audio Interface Module.
PC5921 EXT Door Box Audio Station
Used in conjunction with the PC5928 Audio Interface Module.
Used in conjunction with the PC5928 Audio Interface Module.
PC5921 EXT/R Door Box Audio Station
Used in conjunction with the PC5928 Audio Interface Module. The
Door Box contains a relay so the normal door bell can be used
instead of the internal one generated by the PC5928 module.
Used in conjunction with the PC5928 Audio Interface Module. The
Door Box contains a relay so the normal door bell can be used
instead of the internal one generated by the PC5928 module.
PC5904 Central Station Talk/Listen Module
Used in conjunction with the PC5928 audio interface module
for Talk/Listen-In purposes. This station provides an added
level of volume to the central station operator’s voice.
Each station has a separate microphone and speaker. Each
station must be home run to the interface module using
shielded 22 gauge, 4 conductor wire. All stations can be used
to sound an alarm follower.
Used in conjunction with the PC5928 audio interface module
for Talk/Listen-In purposes. This station provides an added
level of volume to the central station operator’s voice.
Each station has a separate microphone and speaker. Each
station must be home run to the interface module using
shielded 22 gauge, 4 conductor wire. All stations can be used
to sound an alarm follower.
LINKS1000 Cellular Communicator*
The LINKS1000 Cellular Communicator can be used three dif-
ferent ways: as the sole communicator for the panel, as a
backup for either or both telephone numbers or as a redun-
dant backup to the land line communicator where the panel
will call both the land line and via the LINKS.
The LINKS1000 Cellular Communicator can be used three dif-
ferent ways: as the sole communicator for the panel, as a
backup for either or both telephone numbers or as a redun-
dant backup to the land line communicator where the panel
will call both the land line and via the LINKS.
LINKS2X50*
Either the LINKS2150 or LINKS2450 may be used to transmit
alarm information over a long range radio network.
Either the LINKS2150 or LINKS2450 may be used to transmit
alarm information over a long range radio network.
Skyroute Transceiver*
The Skyroute transceiver offers a new wireless method of
communication for the transmission of events using cellemetry
service.
The Skyroute transceiver offers a new wireless method of
communication for the transmission of events using cellemetry
service.
Cabinets
Several different cabinets are available for the PC1555MX
modules. They are as follows:
Several different cabinets are available for the PC1555MX
modules. They are as follows:
PC5003C Cabinet
Main control cabinet for the PC1555MX main panel. Dimen-
sions 288mm x 298mm x 78mm / 11.3” x 11.7” x 3” approxi-
mately.
Main control cabinet for the PC1555MX main panel. Dimen-
sions 288mm x 298mm x 78mm / 11.3” x 11.7” x 3” approxi-
mately.
PC5004C Cabinet
Cabinet to house the PC5400 Printer Module. Dimensions
229mm x 178mm x 65mm / 9” x 7” x 2.6” approximately.
Cabinet to house the PC5400 Printer Module. Dimensions
229mm x 178mm x 65mm / 9” x 7” x 2.6” approximately.
Backplates
There are two different backplates available for keypads to
locate an Audio Station next to the keypad:
There are two different backplates available for keypads to
locate an Audio Station next to the keypad:
PC55BP1 Backplate
This backplate is to be used when an Audio Station is to be
located next to a keypad. Dimensions 208mm x 115mm x
18mm / 8.2” x 4.5” x 0.25” approximately.
This backplate is to be used when an Audio Station is to be
located next to a keypad. Dimensions 208mm x 115mm x
18mm / 8.2” x 4.5” x 0.25” approximately.
PC55BP2 Backplate
This backplate is to be used when an Audio Station is to be
located next to a keypad. In addition the backplate will allow
you to mount a PC5208 Eight Low Current Output Module.
Dimensions 208mm x 115mm x 18mm / 8.2” x 4.5” x 0.7”
approximately.
This backplate is to be used when an Audio Station is to be
located next to a keypad. In addition the backplate will allow
you to mount a PC5208 Eight Low Current Output Module.
Dimensions 208mm x 115mm x 18mm / 8.2” x 4.5” x 0.7”
approximately.
1.3
Out of the Box
Please verify that the following components are included in
your system:
•
your system:
•
one PC5003C main control cabinet
•
one PC1555MX main control circuit board
•
one Power keypad with zone input
•
one Installation Manual with programming worksheets
•
one Instruction Manual for the end user
•
one hardware pack consisting of:
- one mylar cabinet label
- four plastic circuit board standoffs
- sixteen 5600
- four plastic circuit board standoffs
- sixteen 5600
Ω (5.6K) resistors
- one 2200
Ω (2.2K) resistor
- one 1000
Ω (1K) resistor
- ground connection assembly
- one cabinet door plug
- one cabinet door plug
*WLS910, LINKS1000, LINKS2X50, and Skyroute have not been investigated by UL.
WWW.DIYALARMFORUM.COM