Heath Zenith SL-4303 Benutzerhandbuch

Seite von 20
Features
•  Light comes on when motion is detected.
•  Automatically turns light off.
•  Half power Accent lighting.
•  Photocell  keeps  the  light  off  during  daylight
hours.
requirements
•  The light control requires 120 volts AC.
•  If you want to use Manual Mode, the control must
be wired through a switch.
some electrical codes require installation by 
a qualified electrician.
motion sensing Porch 
Light
This package includes:
•  Porch Light
•  Easy to use Universal Mounting Bracket
•  Mounting Hardware
•  Wire Nuts
•  Lens Shield
SL-4303
© 2008 HeathCo LLC
598-1348-00
Mode:
On-Time
Works:  Day  Night
test
5 Sec
x
x
auto/
1, 5, or 10 min
x
accent Off, 3, 6 Hr, to Dawn
x
manual
Until Dawn*
x
OPeratiOn
Note:  When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
test  1  5  10 MIN
test
Set ON-TIME switch to
1, 5, or 10 minutes.
autO
ON-TIME Switch at 1, 5, or 
10 minutes
... back on.
1 Second OFF
then...
Manual  mode  only  works  at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
mOde switching summary
Flip  light  switch  off 
for one second then 
back on*
* If you get confused while switching modes, turn
the power off for one minute, then back on. After
the calibration time the control will be in the AUTO
mode.
MANUAL MODE
AUTO
TEST
manuaL mOde
ON-TIME
TEST
1  5  10 min
Before installation, record the model number 
listed inside the fixture. attach receipt in case 
of possible warranty issues.
model number:
Set the ON-TIME switch
on the sensor to TEST.
Meets  the  ENERGY  STAR
®
guidelines when D
ual
B
rite
®
func-
tion is off.