SVAT Electronics GX5203 Benutzerhandbuch

now you can see

The 2.4 GHz video signals pass easily through your home's interior walls, but the signal

may be reflected by power wires or plumbing inside the wall. If reception is poor, moving

the camera or monitor may fix this problem. Houses with steel frames may experience

interference as well. Microwave ovens, cordless phones and wireless routers are the

most common sources of interference. Try to avoid mounting the monitor near these or

other sources of RF interference.

The GX5203 is designed to work with up to 3 cameras. Additional cameras are sold

separately (indoor - WSE103C / outdoor - WSE201C).

*IMPORTANT
When using more than one camera, make sure you assign each camera a specific

channel (1-3). The channel switch is located on the front of the camera. 

Accordingly the DIP switch located on the back of the monitor should be adjusted to

reflect the channel in use.