SonicWALL 170 Benutzerhandbuch
SonicWALL TZ 170 Wireless Getting Started Guide Page 13
Click on the yellow link for a networking type to see a definition.
Click Next.
Click Next.
5. WAN Network Mode - The second WAN network mode screen configures your
WAN settings for the selection you made in the previous screen.
Static IP
The Setup Wizard screen should display:
WAN Network Mode: NAT Enabled (Static IP)
SonicWALL WAN IP
Address
Address
Enter a single, static IP address. This must be in the address
range assigned to you by your ISP.
range assigned to you by your ISP.
WAN Subnet Mask
Enter the subnet mask for your network, provided by your ISP.
For example, 255.255.255.0.
For example, 255.255.255.0.
Gateway (Router)
Address
Address
Enter the IP address of your Internet gateway, provided by your
ISP.
ISP.
DNS Server Address
Enter the IP address of the DNS server for your network,
provided by your ISP.
provided by your ISP.
DNS Server Address
#2 (optional)
#2 (optional)
You can enter a secondary, back-up DNS server to use if the
first one fails.
first one fails.
Click Next.
DHCP
The Setup Wizard screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN networking settings. The
network settings are provisioned automatically from a DHCP server.
Click Next.
If you selected DHCP, you do not need to enter any WAN networking settings. The
network settings are provisioned automatically from a DHCP server.
Click Next.
PPTP
Select PPTP if you dial into a specific server and log into a VPN
to establish a connection. With PPTP, you can have either a
static or dynamic IP Address.
to establish a connection. With PPTP, you can have either a
static or dynamic IP Address.