Manualsbrain.com
  1. Handbücher
  2. Marken
  3. SonicWALL
  4. 170
  5. Benutzerhandbuch

SonicWALL 170 Benutzerhandbuch

Download
Seite von 50
Page 34   
SonicWALL TZ 170 Wireless Security Appliance Regulatory 
Statement and Safety Instructions
Regulatory Model/Type
Product Name
APL14-034
SonicWALL TZ 170 Wireless
Note: 
Detailed regulatory information can be found in the electronic file, 
“SonicWALL_Products_Regulatory_Statement.pdf,” located on the SonicWALL 
Resource CD provided with the unit. 
Power Supply Information Models APL14-034
If you need to order a power supply for your SonicWALL TZ 170 Wireless, contact 
SonicWALL Technical Support at 408-752-7819 for a replacement. 
This product should only be used with a UL listed power supply marked “Class 2” or 
“LPS”, with an output rated 5 VDC, minimum 2.4 A.
Considerations for Mounting the APL14-034 
•
Consideration must be given to the connection of the equipment to the supply circuit 
and the effect of overloading the circuits has minimal impact on overcurrent 
protection and supply wiring. Appropriate consideration of equipment nameplate 
ratings must be used when addressing this concern.
•
A power cord is included only with units shipped to North America.
•
Mount in a location away from direct sunlight and sources of heat. A maximum 
ambient temperature of 104º F (40º C) is recommended.
•
Route cables away from power lines, fluorescent lighting fixtures, and sources of 
noise such as radios, transmitters, and broadband amplifiers.
•
Ensure that no water or excessive moisture can enter the unit.
•
Allow unrestricted airflow around the unit and through the vents on the side of the 
unit. A minimum of 1 inch (25.44mm) clearance is recommended.
North American Authorized Channels
SonicWALL declares that the APL14-034, when sold in US or Canada is limited to 
CH1~CH11 by specified firmware controlled in the USA.