Siemens A31003-51730-U103-7619 Benutzerhandbuch
The planning and implementation of a DCO Project
For internal use only
07/2010
6-10
OScAR-Pro Customized Operator, User Manual
BHB_DCO_06.fm
Project administration
6.2
Project administration
6.2.1
Create the project
Follow the below instructions to create the project:
No. Task
References
1.
Start the DCO-Designer.
2.
Go to the menu bar and click "Project
New" and use
the keyboard shortcut Ctrl+N or click
in the tool-
bar.
This will open the window:
3.
Use the field "Project name (project directory" to en-
ter a unique and recognizable name for your project
(enter max. 50 characters, not supported characters
are: \/:*?“<>), e.g."EXP Chemical Industries Inc.".
ter a unique and recognizable name for your project
(enter max. 50 characters, not supported characters
are: \/:*?“<>), e.g."EXP Chemical Industries Inc.".
4.
Use the field "Path" to enter the directory name (e.g.
"c:\tetronik\OScAR-Pro-TT") or enter the path by
clicking .
"c:\tetronik\OScAR-Pro-TT") or enter the path by
clicking .
Note:
The system will automatically create a directory with
the above-mentioned project name underneath the
path entered here.
The system will automatically create a directory with
the above-mentioned project name underneath the
path entered here.
5.
Adjust, if necessary, the automatically generated
name of the DCO-Script file.
name of the DCO-Script file.
6.
Click "Ok" to have theOScAR-Pro Customized Oper-
ator create the project.
ator create the project.
Table 6-1
Create the project