Siemens A31003-51730-U103-7619 Benutzerhandbuch

The planning and implementation of a DCO Project

For internal use only

07/2010

OScAR-Pro Customized Operator, User Manual

  

  

  

BHB_DCO_06.fm

Follow the below instructions to test your DCO-Script:

1.

Next, click 

 to switch to the Layout window and verify the result.

2.

Confirm the query if you want to save the project with "Yes".

3.

Now press the Button "Fire alert". 
The Button must start to blink and the Static element "Event name" should read: 
"1000:Fire alert".

4.

Press the Button "Fire alert" again. 
The Button should now stop blinking.

5.

Repeat steps 3 and 4 for the Buttons "Deflagration", "Leakage" and "Short circuit".

6.

Repeat steps 3 and 4 for all "Area" Buttons.

7.

During the steps 3 through 6, the "Invoke" Button may only be enabled if exactly one 
"Event" Button and at least one "Area" Button are blinking.

8.

Now press the Button "More".
This should open the Frame "Announcement selection" and its "Announcement list" un-
der "Controls" should already be filled with dummy values.

9.

Select an announcement and click "Ok". 
This will again open the "Main page" with the Button "More" blinking and the selected 
announcement entered under the Static element "Event name".

10.

Continue the testing until satisfied.

11.

Select one "Event" Button plus at least one "Area" Button and click the Button "Invoke".
One after another, a message window should now open for each selected Area Button 
and contain an XML-Structure index listing both the IDs of the selected broadcast and 
the selected announcement.

Table 6-17

Add a background image to the Main page